How to replace the TPMS Sensor (Snap In Style) on Cadillac SRX?

The vehicle needs to sit on a suitable support before proceeding with Tire Pressure Indicator Sensor (Snap In Style) replacement. Disconnect the tire/wheel assembly from the vehicle then split the tire apart from its rim. Installation requires a new version of the Schrader(R) tire pressure monitor (TPM) together with a fresh TORX screw. Use the TORX screw to remove the tire pressure sensor from the tire pressure valve stem while maintaining the sensor's position to protect the aluminum wheel's clear coating. Pry the tire pressure valve stem out of the rim through its hole. Installation requires the flat of the valve to match the enclosure's flats while being aware that TPM valves and TORX screws exist for single usage. Install the tire pressure sensor on the valve stem before placing a new TORX screw that requires 1.3 N.m (11.5 lb in) torque for tightening. Only approved tire lubricant must be used during mounting operations without silicon or destructive base chemicals. Apply tire soap to the valve stem rubber section then use a tire valve stem mounting tool to insert the stem parallel to the rim's valve hole. When technicians reinflate the tire Snap Fit TPM sensors automatically activate but remain in an OFF state until the tire gets repressed so programming can continue normally. The final procedure includes tire mounting followed by installing the tire/wheel assembly onto the vehicle after vehicle descent and learning the tire pressure sensors.

OEM Cadillac SRX TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 TPMS Sensors found

View related parts
Cadillac SRX Tire Pressure Sensor, Black
Part Number: 13598909
$10.46 MSRP: $19.64
You Save: $9.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit, Tire Valve And Cover Lock; TPMS Sensor Service Kit; TPMS Sensor; Valve Stem; Repair Kit; Tire Sensor Valve; TPMS Sensor Valve Assembly; Tire Valve Kit; Vehicle Security & Safety.
- Replaces: 15263240, 19368646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX TPMS Sensor
Part Number: 25774007
$57.98 MSRP: $113.50
You Save: $55.52 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Tire Pressure Indicator; TPMS Sensor Valve Assembly; Valve Repair Set; Tyre Pressure Repair Kit.; Tire Pressure Sensor; Transmitter; Sensor, Tire Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX TPMS Sensor
Part Number: 25774006
$85.65 MSRP: $156.38
You Save: $70.73 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Tire Pressure; Tire Pressure Sensor; Pressure Sensor; Transmitter
- Replaces: 25763677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Wheel Nut
Part Number: 15234846
$6.78 MSRP: $12.74
You Save: $5.96 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut, Tire Pressure; TPMS Sensor Service Kit; Valve Stem Nut; TPMS Sensor Valve; TPMS Sensor Nut; Pressure Sensor Nut; Tire Sensor Nut; Transmitter Nut; Nut, Wheel
- Replaces: 10268439, 15825474, 15125473, 25708165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX TPMS Sensor
Part Number: 13540601
$56.06 MSRP: $108.80
You Save: $52.74 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Tire Pressure Indicator; Tire Pressure Sensor; Valve Stem; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 12768826, 13598772, 13589597, 22854866, 20922900, 13589255, 13581558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX TPMS Sensor, Black
Part Number: 13540600
$57.19 MSRP: $111.00
You Save: $53.81 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Tire Sensor; Pressure Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13598771, 15254101, 25799331, 13586335, 15825475, 15922396, 20923680, 23445327, 25920615, 22853741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Tire Pressure Sensor
Part Number: 25789964
Product Specifications
- Other Name: Sensor, Tire Pressure Indicator; TPMS Sensor; Pressure Sensor; Sensor, Tire Pressure
- Replaces: 15254102, 25809220
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

Cadillac SRX TPMS Sensor

Our website offers an extensive catalog of genuine Cadillac SRX TPMS Sensor at unbeatable prices. Every OEM Cadillac SRX TPMS Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac SRX TPMS Sensor Parts Questions & Experts Answers

Tire Pressure Sensor, Black
13598909
Q: How to replace the TPMS Sensor (Snap In Style) on Cadillac SRX?
A: The vehicle needs to sit on a suitable support before proceeding with Tire Pressure Indicator Sensor (Snap In Style) replacement. Disconnect the tire/wheel assembly from the vehicle then split the tire apart from its rim. Installation requires a new version of the Schrader(R) tire pressure monitor (TPM) together with a fresh TORX screw. Use the TORX screw to remove the tire pressure sensor from the tire pressure valve stem while maintaining the sensor's position to protect the aluminum wheel's clear coating. Pry the tire pressure valve stem out of the rim through its hole. Installation requires the flat of the valve to match the enclosure's flats while being aware that TPM valves and TORX screws exist for single usage. Install the tire pressure sensor on the valve stem before placing a new TORX screw that requires 1.3 N.m (11.5 lb in) torque for tightening. Only approved tire lubricant must be used during mounting operations without silicon or destructive base chemicals. Apply tire soap to the valve stem rubber section then use a tire valve stem mounting tool to insert the stem parallel to the rim's valve hole. When technicians reinflate the tire Snap Fit TPM sensors automatically activate but remain in an OFF state until the tire gets repressed so programming can continue normally. The final procedure includes tire mounting followed by installing the tire/wheel assembly onto the vehicle after vehicle descent and learning the tire pressure sensors.