How to replace the rear Fender Splash Shield on Cadillac XLR?

The first step for changing rear fender splash shield involves removing both the tire and wheel. Start by taking out the screws which fasten front and rear fender splash shields then remove push-in retainers to access the same shields. Take out the fender splash shield after performing the previously mentioned steps. Install the new fender splash shield by first placing it into position and afterward securing it with the push-in retainers at both front and rear panel locations. Following the requirements of the Fastener Notice in Service Precautions is essential. Screw installation should happen to fasten the front and rear fender splash shield while torquing screws at 2 N.m (18 lb in). The wheel and tire must be installed after all procedures are complete.

OEM Cadillac XLR Fender Splash Shield

Wheelhouse Liner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fender Splash Shields found

View related parts
Cadillac XLR Splash Shield, Front Inner Driver Side
Part Number: 10341340
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac XLR Splash Shield, Front Inner Passenger Side
Part Number: 10341339
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac XLR Fender Liner, Front Passenger Side
Part Number: 15284659
Product Specifications
- Other Name: Liner-Front Wheelhouse Front; Fender Splash Shield; Liner, Front Fender Inner Wheel House
- Position: Front Passenger Side
- Replaces: 10349774, 10438920
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac XLR Wheelhouse Liner, Rear Passenger Side
Part Number: 15219149
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac XLR Wheelhouse Liner, Rear Driver Side
Part Number: 15219148
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac XLR Fender Liner, Front Driver Side
Part Number: 15284660
$46.51 MSRP: $69.23
You Save: $22.72 (33%)
Product Specifications
- Other Name: Liner-Front Wheelhouse Front; Fender Splash Shield; Liner, Front Fender Inner Wheel House
- Position: Front Driver Side
- Replaces: 10349775, 10438919
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

Cadillac XLR Fender Splash Shield

Our website offers an extensive catalog of genuine Cadillac XLR Fender Splash Shield at unbeatable prices. Every OEM Cadillac XLR Fender Splash Shield comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac XLR Fender Splash Shield Parts Questions & Experts Answers

Wheelhouse Liner, Rear Driver Side
15219148
Q: How to replace the rear Fender Splash Shield on Cadillac XLR?
A: The first step for changing rear fender splash shield involves removing both the tire and wheel. Start by taking out the screws which fasten front and rear fender splash shields then remove push-in retainers to access the same shields. Take out the fender splash shield after performing the previously mentioned steps. Install the new fender splash shield by first placing it into position and afterward securing it with the push-in retainers at both front and rear panel locations. Following the requirements of the Fastener Notice in Service Precautions is essential. Screw installation should happen to fasten the front and rear fender splash shield while torquing screws at 2 N.m (18 lb in). The wheel and tire must be installed after all procedures are complete.