OEM Cadillac XLR Timing Cover

Cadillac XLR Timing Cover Parts Questions & Experts Answers

• Timing Cover
  89017798
  Q: How to Perform a Timing Cover Replacement on Cadillac XLR?

  A: A technician should commence engine front cover replacement by following cooling system draining and filling (GE 47716). Start by removing the air cleaner assembly and all belts including those of the accessory drive and Drive Belt tensioners and Drive Belt idler pulleys. After removing the Water Pump Pulley, water outlet housing, and radiator and heater hoses from the Thermostat Housing. First remove the crankshaft balancer and engine front cover bolts before taking out the cover with the old gasket and oil pump drive to crankshaft balancer friction washer which gets discarded. Engine front cover preparation should start before adding the new friction washer and sealing the upper and lower crankcases split line with a small amount of sealant. Put the new engine front cover gasket in position so it fits over the crankcase dowel pins then put sealant on the gasket pad area. Secure the engine front cover after adding thread locking compound to its bolts and tighten them to 15 nm (11 lb ft) in the proper sequence. Put back the Radiator Hose along with the heater hose and water outlet housing before setting the crankshaft balancer into position and the Water Pump Pulley. Start by placing the accessory Drive Belt idler pulleys, tensioners, and belts before attaching the air cleaner assembly. Conclude your work by performing cooling system draining and filling (GE 47716) procedures.