Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006 Chevrolet Avalanche 2500 | LS, LT | 8 Cyl 8.1 L GAS
Chevrolet Avalanche 2500 Catalytic Converter
Our website offers an extensive catalog of genuine Chevrolet Avalanche 2500 Catalytic Converter at unbeatable prices. Every OEM Chevrolet Avalanche 2500 Catalytic Converter comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Avalanche 2500 Catalytic Converter Parts Questions & Experts Answers
Q: How to replace the catalytic converter on 6.01- and 8.11- engines on Chevrolet Avalanche 2500?
A: To change the Catalytic Converter for 6.01- and 8.11- engines, firstly, raise and support the vehicle. The engine shield bolts and shield if a need arises followed by oil pan skid plate bolts and plate if necessary. Next, remove the Muffler. Remove the connector position assurance (CPA) retainers and the Oxygen Sensor electrical connectors (1, 2). Discard the left exhaust manifold pipe nuts and then remove the Catalytic Converter, sliding the Catalytic Converter hanger off the exhaust pipe hanger bracket. Replace the Catalytic Converter and apply anti-seize compound gm pn 12377953 or equivalent to the threads of the old oxygen sensors and install the ones previously installed, tightening to 42 nm (31 ft. Lbs). Install a new exhaust seal to the exhaust manifold, followed by Catalytic Converter, making sure the hanger slides into the exhaust pipe hanger bracket. Reinstall the left exhaust manifold pipe nuts and tighten them to 50 nm (39 ft. Lbs.) of torque, connect the bank one o2 sensor electrical connectors (1, 2) and the cpa retainers. The Muffler, oil pan skid plate and bolts if necessary must be reinstalled (20 Nm (15 ft. Lbs.)), also the engine shield and bolts if necessary (same force: 20 Nm (15 ft.lbs.)) must be reinstalled. Finally, lower the vehicle.