Make sure this part fits

GM 15077755
Catalytic Converter, Driver Side

2001-2006 GM

Customer Questions & Expert Answers (10)
GM 15077755 Catalytic Converter, Driver Side
  • Part Description
    Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe
  • Position
    Driver Side
  • Replaces
    15729035
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Chevrolet Avalanche 2500LS, LT8 Cyl 8.1 L GAS
    2004-2006 Chevrolet Silverado 1500LS, LT, SS, Z71 Off-Road8 Cyl 6.0 L GAS
    2005-2006, 2001-2002 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2004, 2001-2002 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2004-2006, 2001-2002 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2004-2006, 2001-2002 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2006 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2004-2006, 2001-2002 GMC Sierra 1500Base, C3, Denali, SLE, SLT, WT8 Cyl 6.0 L GAS
    2005-2006, 2001-2002 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2004, 2001-2002 GMC Sierra 2500Base, SL, SLE, SLT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15077755 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15077755 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the heat shield bolts for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the left side exhaust heat shield at the dash panel and secure it with the heat shield nuts, tightening them to 9 Nm (80 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What should be done after supporting the transmission for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the transmission mount to transmission support nuts, raise the transmission off the support, and take out the transmission support crossmember bolts and the crossmember itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the first step to replace the right exhaust pipe on a 6.6L (LLY) engine for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    First, remove the turbocharger exhaust pipe and then the exhaust pipe bolts in the proper sequence.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the torque specification for the exhaust manifold pipe nuts for 6.0L or 8.1L engines for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Tighten them to 50 Nm (39 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the torque specification for the right exhaust manifold pipe nuts for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Tighten to 50 Nm (39 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    What is the next step after removing the exhaust manifold pipe for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Discard the seal and for installation, if equipped with a 6.6L engine, install the exhaust manifold pipe, applying water-based lubricant to the exhaust pipe hanger bracket to aid installation, and slide the hanger into the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    How should the exhaust muffler nuts be tightened for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Install the exhaust muffler nuts and tighten them to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    What is the final step before lowering for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    If equipped, clip the oxygen sensor connection to the floor reinforcement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    How do you reconnect the oxygen sensors for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Connect the oxygen sensor electrical connectors and the CPA retainers, then clip the oxygen sensors' electrical connectors to the hose clip and transmission crossmember. Connect the oxygen sensor electrical connectors and CPA retainers, install the clip around the engine harness and the oxygen sensor pigtail, and connect the oxygen sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Catalytic Converter, Driver Side 15077755 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15077755 Catalytic Converter, Driver Side is available in the market under the name GM Catalytic Converter, Exhaust Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15077755 Catalytic Converter, Driver Side fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 15077755 maintains top performance when functioning as the Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe unit at its Driver Side. The component 15077755 is constructed from durable material and its dimensions span 54.1 x 30.6 x 16.5 inches while weighing 28.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe. The part 15077755 has available replacement options 15729035. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.