Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount; Mount, Transmission Mounting
Replaces: 15750514, 15683966, 15022551
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2006 Chevrolet Avalanche 2500 | Base, LS, LT | 8 Cyl 8.1 L GAS
Other Name: Mount Assembly-Engine Frame Side; Engine Mount Bracket; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Replaces: 15761271
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2006 Chevrolet Avalanche 2500 | Base, LS, LT | 8 Cyl 8.1 L GAS
Chevrolet Avalanche 2500 Motor And Transmission Mount
Want to cut long-term maintenance and repair costs? Choose OEM Motor And Transmission Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Avalanche 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Avalanche 2500 Motor And Transmission Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Chevrolet Avalanche 2500 Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to Replace the Motor and Transmission Mount on a 4L80-E on Chevrolet Avalanche 2500?
A:
Begin replacement of the 4l80-e transmission mount by properly raising the vehicle then installing a transmission jack to support the transmission. Start by loosening the two nuts which connect the transmission mount to the transmission support before lifting the transmission from its required position. After removing the bolts operate the jack to lift the transmission until the transmission mount clears out of the vehicle. For installation, position the transmission mount in place and install the bolts that secure it to the transmission (2WD) or transfer case adapter (4WD), tightening the bolts to 47 nm (35 ft. Lbs.) for 4wd vehicles and 50 nm (37 ft. Lbs.) for 2wd vehicles. Install the two nuts by screwing them to the transmission support before tightening them to 40 nm (30 ft. Lbs.). Lower the vehicle after removing the transmission jack.