How to replace the Automatic Transmission Filter on Chevrolet Blazer?

Support and raise the vehicle next to an appropriate drain pan positioned underneath the transmission oil pan. The transmission oil pan can be lowered by unscrewing its Drain Plug if present along with removing bracket bolts to hold the range selector cable bracket out of the way but keeping the cable intact. Focus on removing bolts from the front and side sections of the oil pan while releasing the rear bolts by four turns. A rubber mallet tapping motion will help the oil pan to release and drain fluid before removing the last bolts that detach the oil pan together with its gasket. Grasp the filter firmly before twisting it to remove and subsequently remove the filter seal while pliers may be needed to dislodge possible seals. Begin by removing the rubber seal. Later on, check the fluid state along with the filter for both clutch material debris as well as bronze slivers and steel particles. Immerse the transmission case and oil pan gasket surfaces using solvent until all remnants of old gasket material are completely gone. Found the new filter seal in automatic transmission fluid and hand-position it correctly inside the transmission case using appropriate socket tools. Install the new filter before putting on the oil pan with its new gasket while tightening the transmission case bolts to 11 nm (97 inch lbs.) in a alternating and even manner. The range selector cable bracket should be reinstalled with its bolts secured to 25 nm (18 ft. Lbs.). Treat the oil pan Drain Plug threads with gm p/n 12346004 sealant before installing the plug by tightening it to 18 nm (13 ft. Lbs.). Lower the vehicle while adding dexron iii transmission fluid to achieve the proper fluid level but check the cold fluid level first during the first fill-up and inspect the oil pan gasket for any signs of leaking.

OEM Chevrolet Blazer Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Automatic Transmission Filters found

View related parts
Chevrolet Blazer Auto Transmission Filter Part Number: 8657926
$42.67 MSRP: $65.82
You Save: $23.15 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Kit, Automatic Transmission Fluid; Transmission Filter; Filter Kit, Transmission Oil Suction Tube; Oil Pan Pump Suction.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1992 Chevrolet Blazer | Cheyenne, Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Filter Part Number: 24236799
$36.64 MSRP: $65.42
You Save: $28.78 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Kit, Automatic Transmission Fluid; Transmission Filter; Filter Kit, Transmission Oil Suction Tube; Filter Kit, Oil Pan Pump Suction; Filter Kit
- Replaces: 24229186, 24200796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2003 Chevrolet Blazer | Base, Cheyenne, LS, LT, Silverado, Silverado Sport, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Filter Part Number: 24208576
$35.25 MSRP: $62.95
You Save: $27.70 (44%)
ADD TO CART
Product Specifications
- Other Name: Filter Kit, Automatic Transmission Fluid; Hydraulic Filter; Transmission Filter Kit.; Filter Kit, Transmission Oil Suction Tube; Filter Kit, Oil Pan Pump Suction; Filter Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Filter Part Number: 8684221
$34.98 MSRP: $62.46
You Save: $27.48 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Automatic Transmission Fluid; Transmission Filter; Filter, Oil Pan Pump Suction
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Filter Part Number: 12360651
Product Specifications
- Other Name: Transmission Filter; Filter Kit, Transmission Oil Suction Tube; Filter, Transmission Oil Suction Tube; Filter Kit, Oil Pan Pump Suction
- Replaces: 12337210, 24210386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1990 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL

Chevrolet Blazer Automatic Transmission Filter

Want to cut long-term maintenance and repair costs? Choose OEM Automatic Transmission Filter. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Blazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Blazer Automatic Transmission Filter includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Automatic Transmission Filter on Chevrolet Blazer is as important component that is responsible for the health of the transmission system since it is a receptor of the dirty particles in the transmission fluid. This filter makes sure that contaminants are not allowed to move inside the transmission that might result in clogs or damages to transmission that in turn impacts both transmission efficiency and durability. Chevrolet Blazer models have employed a diversity of Automatic Transmission Filters at one time or another. The most common type is internal, which lay at the bottom of a transmission case and can be accessed simply by lifting off a fluid pan during the transmission service. Depending on the model of Blazer some of the filters can be a lot more intricate than others and may demand a considerable amount of disassembly before the job of replacing a filter can be accomplished. There are also external spin-on or cartridge-type filters with quicker access to the cakes and, therefore, with a higher frequency of changing. There are also performance transmission filters which provide better filtration and improved fluid flow hence better performance of the transmission.

Chevrolet Blazer Automatic Transmission Filter Parts Questions & Experts Answers

Filter
24208576
Q: How to replace the Automatic Transmission Filter on Chevrolet Blazer?
A:
Support and raise the vehicle next to an appropriate drain pan positioned underneath the transmission oil pan. The transmission oil pan can be lowered by unscrewing its Drain Plug if present along with removing bracket bolts to hold the range selector cable bracket out of the way but keeping the cable intact. Focus on removing bolts from the front and side sections of the oil pan while releasing the rear bolts by four turns. A rubber mallet tapping motion will help the oil pan to release and drain fluid before removing the last bolts that detach the oil pan together with its gasket. Grasp the filter firmly before twisting it to remove and subsequently remove the filter seal while pliers may be needed to dislodge possible seals. Begin by removing the rubber seal. Later on, check the fluid state along with the filter for both clutch material debris as well as bronze slivers and steel particles. Immerse the transmission case and oil pan gasket surfaces using solvent until all remnants of old gasket material are completely gone. Found the new filter seal in automatic transmission fluid and hand-position it correctly inside the transmission case using appropriate socket tools. Install the new filter before putting on the oil pan with its new gasket while tightening the transmission case bolts to 11 nm (97 inch lbs.) in a alternating and even manner. The range selector cable bracket should be reinstalled with its bolts secured to 25 nm (18 ft. Lbs.). Treat the oil pan Drain Plug threads with gm p/n 12346004 sealant before installing the plug by tightening it to 18 nm (13 ft. Lbs.). Lower the vehicle while adding dexron iii transmission fluid to achieve the proper fluid level but check the cold fluid level first during the first fill-up and inspect the oil pan gasket for any signs of leaking.