How to replace the Camshaft Position Sensor on Chevrolet Blazer?

The first step to replace the camshaft position (CMP) sensor involves disconnecting the Spark Plug Wires together with the ignition coil wire from the Distributor followed by removing the cmp sensor harness connector from the Distributor. Begin by unscrewing the Distributor Cap screws then removing the Distributor Cap before moving on to unfasten the rotor screws along with the rotor. The square slot of the reluctor wheel needs to be aligned with the cmp sensor before removing the cmp screws and the cmp sensor. Use fresh components with a thread locking compound when reinstalling the system because the old screws and cap along with cmp sensor must be replaced. The cmp sensor must pass through the reluctor wheel slot before installing fresh cmp mounting screws while tightening them to 2.2 n.m (19 lb in). The next step involves putting the rotor onto the reluctor wheel before using new rotor screws to fasten it while tightening them to 2 n.m (18 lb in). Secure both Distributor caps with new handling screws which must be tightened to 2.4 n.m (21 lb in). Attach the cmp sensor harness connector while also reattaching all Spark Plug Wires and the ignition coil wire.

OEM Chevrolet Blazer Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Camshaft Position Sensors found

View related parts
Chevrolet Blazer Camshaft Position Sensor
Part Number: 12646782
$18.03 MSRP: $33.86
You Save: $15.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Camshaft Position Sensor
Part Number: 19417445
$65.22 MSRP: $122.48
You Save: $57.26 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Camshaft Position Sensor
Part Number: 12638266
$36.67 MSRP: $74.51
You Save: $37.84 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2021 Chevrolet Blazer | Base, L, LT | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Blazer Camshaft Position Sensor
Part Number: 12698173
$12.36 MSRP: $23.22
You Save: $10.86 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaced by: 12733487
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS

Chevrolet Blazer Camshaft Position Sensor

Our website offers an extensive catalog of genuine Chevrolet Blazer Camshaft Position Sensor at unbeatable prices. Every OEM Chevrolet Blazer Camshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer Camshaft Position Sensor Parts Questions & Experts Answers

Camshaft Position Sensor
19417445
Q: How to replace the Camshaft Position Sensor on Chevrolet Blazer?
A: The first step to replace the camshaft position (CMP) sensor involves disconnecting the Spark Plug Wires together with the ignition coil wire from the Distributor followed by removing the cmp sensor harness connector from the Distributor. Begin by unscrewing the Distributor Cap screws then removing the Distributor Cap before moving on to unfasten the rotor screws along with the rotor. The square slot of the reluctor wheel needs to be aligned with the cmp sensor before removing the cmp screws and the cmp sensor. Use fresh components with a thread locking compound when reinstalling the system because the old screws and cap along with cmp sensor must be replaced. The cmp sensor must pass through the reluctor wheel slot before installing fresh cmp mounting screws while tightening them to 2.2 n.m (19 lb in). The next step involves putting the rotor onto the reluctor wheel before using new rotor screws to fasten it while tightening them to 2 n.m (18 lb in). Secure both Distributor caps with new handling screws which must be tightened to 2.4 n.m (21 lb in). Attach the cmp sensor harness connector while also reattaching all Spark Plug Wires and the ignition coil wire.

Related Chevrolet Blazer Parts

Browse Chevrolet Blazer Camshaft Position Sensor by Years

2024 2023 2022 2021 2020 2019 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995