How to clean the throttle body properly on Chevrolet Blazer?

In cleaning the Throttle Body, you would first remove the air cleaner outlet duct. After removing the throttle valve housing and throttle valve plate, use your motor oil to soak these components to make it easier to remove any deposits on them. Then, use a suitable tool to clean the throttle valve plate and the bore of the Throttle Body, making sure that the throttle valve is open to allow thorough cleaning of all constraint surfaces. Clean the Throttle Body bore and the throttle valve plate with a clean shop towel with gm top engine cleaner (P/N 1052626) or an equivalent detergent. Care should be taken when using immersion cleaners or solvents on assembly parts that have the throttle position (TP), idle air control (IAC) valve, or sealed throttle shaft bearings in place, as this could damage electric components, sensors, and seals or parachute rings, and solvents also reduce the effectiveness of non-serviceable throttle shaft bearings. Avoid using wire brushes or scrapers for they can damage Throttle Body components and avoid cleaner containing methyl ethyl ketone for they can damage components in an unnecessary way. If deposits are too much, dismantle the Throttle Body for cleaning using a parts cleaning brush that should not be dipped into a patch of cleaning solvent. Disassemble the Throttle Body and clean it, then reinstall the Throttle Body and the air cleaner outlet duct.

OEM Chevrolet Blazer Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Throttle Bodies found

View related parts
Chevrolet Blazer Throttle Body
Part Number: 17113530
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 17113334
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17113656
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Blazer | LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17113021
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17112913
Product Specifications
- Other Name: Injector Assembly, Throttle Body Fuel; Injector, Fuel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17112514
Product Specifications
- Other Name: Injector, Fuel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Chevrolet Blazer | Cheyenne, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17112508
Product Specifications
- Other Name: Package, TBI Replacement; Injector, Fuel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Chevrolet Blazer | Cheyenne, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17112497
Product Specifications
- Other Name: Body Kit; Injector, Fuel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Chevrolet Blazer | Cheyenne, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17096175
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 12595276
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 17113650, 88894295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Throttle Body
Part Number: 17112516
Product Specifications
- Other Name: Body Kit, Throttle Body/Carburetor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet Blazer | Scottsdale, Silverado | 8 Cyl 5.7 L GAS

Chevrolet Blazer Throttle Body

Our website offers an extensive catalog of genuine Chevrolet Blazer Throttle Body at unbeatable prices. Every OEM Chevrolet Blazer Throttle Body comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer Throttle Body Parts Questions & Experts Answers

Throttle Body
12595276
Q: How to clean the throttle body properly on Chevrolet Blazer?
A: In cleaning the Throttle Body, you would first remove the air cleaner outlet duct. After removing the throttle valve housing and throttle valve plate, use your motor oil to soak these components to make it easier to remove any deposits on them. Then, use a suitable tool to clean the throttle valve plate and the bore of the Throttle Body, making sure that the throttle valve is open to allow thorough cleaning of all constraint surfaces. Clean the Throttle Body bore and the throttle valve plate with a clean shop towel with gm top engine cleaner (P/N 1052626) or an equivalent detergent. Care should be taken when using immersion cleaners or solvents on assembly parts that have the throttle position (TP), idle air control (IAC) valve, or sealed throttle shaft bearings in place, as this could damage electric components, sensors, and seals or parachute rings, and solvents also reduce the effectiveness of non-serviceable throttle shaft bearings. Avoid using wire brushes or scrapers for they can damage Throttle Body components and avoid cleaner containing methyl ethyl ketone for they can damage components in an unnecessary way. If deposits are too much, dismantle the Throttle Body for cleaning using a parts cleaning brush that should not be dipped into a patch of cleaning solvent. Disassemble the Throttle Body and clean it, then reinstall the Throttle Body and the air cleaner outlet duct.

Related Chevrolet Blazer Parts

Browse Chevrolet Blazer Throttle Body by Years

2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1994 1993 1992 1991