How to replace the Turn Signal Switch on Chevrolet Blazer?

To replace the turn signal switch; first deactivate the Restraints system, then follow the steps for removal of the upper and lower trim covers. Check the reinstallation of the abrasion sleeve for the steering column wire harness assembly, with attention to the connector's location to be installed afterwards. Take out the wire harness assembly from the wire harness strap and remove the turn signal and multifunction switch assembly connector with the SIR system coil connector. Slide the two connectors of a turn signal and multifunction switch assembly from the bulkhead connector. Then, two pan head tapping screws and should be removed from the turn signal and multifunction switch assembly and the assembly is removed from the steering column till head assembly then. For installation put the turn signal and multifunction switch assembly onto the steering column tilt head assembly with the electrical contact resting on the turn signal cancel cam assembly. Fasten it with the two pan head tapping screws and , tighten the upper one to 3 Nm (27 inch lbs.) and the lateral one to 7 Nm (62 inch lbs.). Slide the two connectors into the bulkhead connector and snap the turn signal and multifunction switch assembly connector to the SIR coil connector. Replace the abrasion sleeve onto the steering column wire harness assembly, making sure the ignition lock cylinder case wires and connector are properly aligned. Finally, connect the wire harness assembly into the wire harness strap, and re-fit the upper and lower trim covers, and activate the Restraints system.

OEM Chevrolet Blazer Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Turn Signal Switches found

View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 26100853
$74.31 MSRP: $350.53
You Save: $276.22 (79%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Windshield Wiper & Washer Switch.; Combination Switch; Front Wiper, Turn Signal, and Headlamp Dimmer Control.
- Replaces: 26063387
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 26100837
$159.81 MSRP: $238.88
You Save: $79.07 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Windshield Wiper & Washer Switch; Multi Purpose Combination Switch; Front Wiper Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Replaces: 26062270, 26083635, 26090641, 26096832
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 26100985
$282.71 MSRP: $422.58
You Save: $139.87 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Windshield Washer Switch; Multi Purpose Switch; Combination Switch; Headlamp Dimmer; Signal; Wiper & Washer Control; Turn Signal Lamp.
- Replaces: 26083629, 26047330, 26097019, 26097021, 26091771, 26083627, 26091769, 26054727
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Multifunction Switch
Part Number: 25111261
$124.57 MSRP: $232.46
You Save: $107.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Lever, Transmission Control Lever; Multi Purpose Switch; Engagement Switch; Lever
- Replaced by: 19353956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1990 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 26100852
$173.34 MSRP: $323.46
You Save: $150.12 (47%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Windshield Wiper & Washer Switch.; Combination Switch; Front Wiper, Turn Signal, and Headlamp Dimmer Control.
- Replaces: 26063386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Turn Signal Switch, Black
Part Number: 84925178
$25.74 MSRP: $40.29
You Save: $14.55 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal *Black; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch, Turn Signal Lamp
- Replaces: 23337730, 84414712, 23354978
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Turn Signal Switch, Black
Part Number: 84925176
$45.80 MSRP: $67.26
You Save: $21.46 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal *Black; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch, Turn Signal Lamp
- Replaces: 23354977, 84414711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 26100986
$245.95 MSRP: $367.63
You Save: $121.68 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Windshield Washer Switch; Multi Purpose Switch; Combination Switch; Headlamp Dimmer Switch; Signal Switch; Wiper & Washer Control; Turn Signal Lamp Switch.
- Replaces: 26083628, 26054726, 26054728, 26091770, 26083630, 26097022, 26047331, 26091772, 26097020
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 26100838
$311.48 MSRP: $465.58
You Save: $154.10 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Windshield Wiper & Washer Switch; Multi Purpose Combination Switch; Front Wiper Switch; Turn/Wiper Switch; Windshield Wiper & Washer Control; Turn Signal Lamp; Headlamp Dimmer
- Replaces: 26090642, 26096833, 26062269, 26083636
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 1997988
Product Specifications
- Other Name: Switch, Turn Signal; Hazard Flasher Switch; Multi Purpose Switch; Hazard Switch; Signal Switch; Turn Signal & Hazard Switch; Switch; Lever; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1994 Chevrolet Blazer | Base, Cheyenne, Scottsdale, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Turn Signal Switch
Part Number: 1995976
Product Specifications
- Other Name: Switch - T; Multi Purpose Switch; Signal Switch; Switch; Switch, Turn Signal Lamp
- Replaces: 1995975
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Signal Lever
Part Number: 19353957
Product Specifications
- Other Name: Lever, Turn Signal Control; Lever
- Replaces: 25111408
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Turn Signal
Part Number: 22510733
Product Specifications
- Other Name: Lever, Turn Signal & Headlamp Dimmer Switch & Windshield Wiper & Windshield Washer; Combination Switch; Signal Lever; Turn/Wiper Switch; Turn/Wiper Lever; Lever; Lever, Turn Signal Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

Chevrolet Blazer Turn Signal Switch

Our website offers an extensive catalog of genuine Chevrolet Blazer Turn Signal Switch at unbeatable prices. Every OEM Chevrolet Blazer Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer Turn Signal Switch Parts Questions & Experts Answers

Turn Signal Switch
26100837
Q: How to replace the Turn Signal Switch on Chevrolet Blazer?
A: To replace the turn signal switch; first deactivate the Restraints system, then follow the steps for removal of the upper and lower trim covers. Check the reinstallation of the abrasion sleeve for the steering column wire harness assembly, with attention to the connector's location to be installed afterwards. Take out the wire harness assembly from the wire harness strap and remove the turn signal and multifunction switch assembly connector with the SIR system coil connector. Slide the two connectors of a turn signal and multifunction switch assembly from the bulkhead connector. Then, two pan head tapping screws and should be removed from the turn signal and multifunction switch assembly and the assembly is removed from the steering column till head assembly then. For installation put the turn signal and multifunction switch assembly onto the steering column tilt head assembly with the electrical contact resting on the turn signal cancel cam assembly. Fasten it with the two pan head tapping screws and , tighten the upper one to 3 Nm (27 inch lbs.) and the lateral one to 7 Nm (62 inch lbs.). Slide the two connectors into the bulkhead connector and snap the turn signal and multifunction switch assembly connector to the SIR coil connector. Replace the abrasion sleeve onto the steering column wire harness assembly, making sure the ignition lock cylinder case wires and connector are properly aligned. Finally, connect the wire harness assembly into the wire harness strap, and re-fit the upper and lower trim covers, and activate the Restraints system.