How to replace the Front Cross-Member and Rear Crossmember on Chevrolet Camaro?

Start by removing the lower control arms before performing a crossmember replacement. The installation requires j 41044 engine support adapters and j 42451 engine support adapter kit and j 28467-b universal support fixture and j 36462-a engine support adapter for engine lifting support. Afterward remove both the steering gear and engine mounts. Drain the brake pipe clip bolt located on the crossmember's passenger position then remove the brake pipe clip bolt on the driver side. Disengage the wheel speed sensor electrical connector then remove the harness clip and all harness clips from the crossmember. After removing the crossmember bolts it will be possible to pull the brake pipes off the crossmember so you can extract the crossmember from the vehicle. To install replace the crossmember into position within the vehicle then attach the brake pipes to it. Put the crossmember bolts in place then tighten all lower crossmember bolts to 125 n.m (92 lb ft) while upper crossmember bolts require 145 n.m (107 lb ft) torque. The process requires reattaching harness clips to the crossmember while connecting the wheel speed sensor electrical connector , followed by installation of the harness clip from that crossmember . Begin by installing the brake pipe clip bolt at the driver side of the crossmember then torque it to 13 n.m (115 lb in). Next install the brake pipe clip bolt at the passenger side of the crossmember while torquing it to 13 n.m (115 lb in). Reinstall the steering gear and engine mounts before removing components j 41044 j 42451 j 28467-b and j 36462-a and finishing with lower Control Arm installation.

OEM Chevrolet Camaro Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Front Cross-Members found

View related parts
Chevrolet Camaro Suspension Crossmember Part Number: 10081659
$226.25 MSRP: $1098.97
You Save: $872.72 (80%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember, Intermediate
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10438424
Product Specifications
- Other Name: Crossmember
- Position: Front
- Replaces: 10245741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10438427
Product Specifications
- Other Name: Crossmember; Crossmember, Front Frame Cross Member
- Position: Front
- Replaces: 10293585
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10438426
Product Specifications
- Other Name: Crossmember; Crossmember, Front Frame Cross Member
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10438425
Product Specifications
- Other Name: Crossmember; Crossmember, Front Frame Cross Member
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10259280
Product Specifications
- Other Name: Crossmember; Crossmember, Front Frame Cross Member
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Camaro | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10259279
Product Specifications
- Other Name: Crossmember; Crossmember, Front Frame Cross Member
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet Camaro | Z28 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10245745
Product Specifications
- Other Name: Crossmember; Crossmember, Front Frame Cross Member
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chevrolet Camaro | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Camaro Engine Cradle Part Number: 10245738
Product Specifications
- Other Name: Crossmember; Crossmember, Front Frame Cross Member
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Indianapolis 500 Pace Car, Z28 | 8 Cyl 5.7 L GAS

Chevrolet Camaro Front Cross-Member

Want to cut long-term maintenance and repair costs? Choose OEM Front Cross-Member. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Front Cross-Member includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Camaro Front Cross-Member Parts Questions & Experts Answers

Engine Cradle
10438425
Q: How to replace the Front Cross-Member and Rear Crossmember on Chevrolet Camaro?
A:
Start by removing the lower control arms before performing a crossmember replacement. The installation requires j 41044 engine support adapters and j 42451 engine support adapter kit and j 28467-b universal support fixture and j 36462-a engine support adapter for engine lifting support. Afterward remove both the steering gear and Engine Mounts. Drain the brake pipe clip bolt located on the crossmember's passenger position then remove the brake pipe clip bolt on the driver side. Disengage the wheel speed sensor electrical connector then remove the harness clip and all harness clips from the crossmember. After removing the crossmember bolts it will be possible to pull the brake pipes off the crossmember so you can extract the crossmember from the vehicle. To install replace the crossmember into position within the vehicle then attach the brake pipes to it. Put the crossmember bolts in place then tighten all lower crossmember bolts to 125 n.m (92 lb ft) while upper crossmember bolts require 145 n.m (107 lb ft) torque. The process requires reattaching harness clips to the crossmember while connecting the wheel speed sensor electrical connector , followed by installation of the harness clip from that crossmember . Begin by installing the brake pipe clip bolt at the driver side of the crossmember then torque it to 13 n.m (115 lb in). Next install the brake pipe clip bolt at the passenger side of the crossmember while torquing it to 13 n.m (115 lb in). Reinstall the steering gear and engine mounts before removing components j 41044 j 42451 j 28467-b and j 36462-a and finishing with lower Control Arm installation.