How to Replace a Rack and Pinion Boot for Off Vehicle on Chevrolet Camaro?

For boot replacement on the vehicle start by using j 22610 keystone clamp pliers (J 22610) to disconnect the outer tie rod followed by removing the hex jam nut from the inner tie rod assembly. Remove the tie rod end clamp from the Rack and Pinion Boot while using side cutters to remove the boot clamp from the Rack and Pinion Boot. The old boot clamp must be disposed of after removal. The Rack And Pinion gear assembly requires removal of the Rack and Pinion Boot. When reassembling the vehicle place the new boot clamp onto the Rack and Pinion Boot and apply grease to both the inner tie rod assembly and the Rack And Pinion gear assembly before mounting the new Rack and Pinion Boot onto the inner tie rod assembly . Check that the Rack and Pinion Boot remains free of puckers and twisting; if needed readjust it by hand before seating it into the gear assembly groove. November 1st, 2022 marks the beginning of fall and brings with it cooler temperatures. Adjust the boot if needed by hand until it fully fits into the gear assembly groove. Forward the clamp installation by using j 22610 keystone clamp pliers (J 22610) on the Rack and Pinion Boot to crimp the boot clamp . The j 22610 keystone clamp pliers (J 22610) is used to pinch together the tie rod end clamp then secure the hex jam nut back to the inner tie rod assembly .

OEM Chevrolet Camaro Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack and Pinion Boots found

View related parts
Chevrolet Camaro Tie Rod Boot Part Number: 22789026
$89.02 MSRP: $141.35
You Save: $52.33 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Tie Rod Boot Part Number: 22776532
$18.49 MSRP: $30.43
You Save: $11.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Tie Rod Boot Part Number: 92227423
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Rack and Pinion Boot

Want to cut long-term maintenance and repair costs? Choose OEM Rack and Pinion Boot. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Rack and Pinion Boot includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Rack and Pinion Boot in Chevrolet Camaro play very important role in protecting the steering rack from dust and grimes. In fact, this rubber element is used as protective covers at both 'ends' of the rack, this means that the internal procedures continue running whilst being shielded from external influences. There has been the use of different types of Rack and Pinion Boot in Chevrolet Camaro models throughout the years that have been aimed at improving the truck's durability and performance. A compromised Rack and Pinion Boot may cause more exposure on the rack and pinion system hence may result to failure. The Rack and Pinion Boot plays the critical role of enhancing the durability and reliability of the power steering in Chevrolet Camaro therefore its proper maintenance to ensure its functionality is paramount importance.

Chevrolet Camaro Rack and Pinion Boot Parts Questions & Experts Answers

Tie Rod Boot
21011025
Q: How to Replace a Rack and Pinion Boot for Off Vehicle on Chevrolet Camaro?
A:
For boot replacement on the vehicle start by using j 22610 keystone clamp pliers (J 22610) to disconnect the outer tie rod followed by removing the hex jam nut from the inner tie rod assembly. Remove the tie rod end clamp from the Rack And Pinion Boot while using side cutters to remove the boot clamp from the Rack and Pinion Boot. The old boot clamp must be disposed of after removal. The Rack And Pinion gear assembly requires removal of the Rack and Pinion Boot. When reassembling the vehicle place the new boot clamp onto the Rack and Pinion Boot and apply grease to both the inner tie rod assembly and the Rack And Pinion gear assembly before mounting the new Rack and Pinion Boot onto the inner tie rod assembly . Check that the Rack and Pinion Boot remains free of puckers and twisting; if needed readjust it by hand before seating it into the gear assembly groove. November 1st, 2022 marks the beginning of fall and brings with it cooler temperatures. Adjust the boot if needed by hand until it fully fits into the gear assembly groove. Forward the clamp installation by using j 22610 keystone clamp pliers (J 22610) on the Rack and Pinion Boot to crimp the boot clamp . The j 22610 keystone clamp pliers (J 22610) is used to pinch together the tie rod end clamp then secure the hex jam nut back to the inner tie rod assembly .