Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-2002 Chevrolet Camaro | Base, Berlinetta, Indianapolis 500 Pace Car, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition, Z28 SS | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Other Name: Relay Assembly, Fan Control *Black; Daytime Running Light, Rear Window Defroster, Multi Purpose, Cooling Fan, ABS Relay; Fan Relay; automotive relay series for interior, engine, body & control systems.
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-2002 Chevrolet Camaro | Base, Berlinetta, Indianapolis 500 Pace Car, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition, Z28 SS | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Other Name: Rear Window Defroster Relay; Multi Purpose Relay; Relay, Rear Window Defogger
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
Chevrolet Camaro Relay
Our website offers an extensive catalog of genuine Chevrolet Camaro Relay at unbeatable prices. Every OEM Chevrolet Camaro Relay comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Camaro Relay Parts Questions & Experts Answers
Q: How to replace the Power Distribution Relay on Chevrolet Camaro?
A: The replacement of the Power Distribution Relay begins with locating it according to the Master Electrical Component List which indicates its vehicle position. The first step is to eliminate any fasteners fastening the relay before taking out any connector position assurance devices and secondary locks. Handle the relay with care while removing it from the wiring harness unless fasteners or tape is securing it. After detaching the relay from the wire harness connector you should connect the new relay to the wire harness connector before reinstalling secondary locks and CPA devices and then return the relay into position with original fasteners or tape.