How to service the Brake Fluid Level Sensor/Switch on Chevrolet Cavalier?

To work on the Brake Fluid Level Sensor/Switch, first remove the electrical connector from the fluid level switch . Follow this by pressing the switch locking tabs at the inboard side with needle nose pliers to pry the fluid level switch loose. Insert the fluid level switch into the master cylinder reservoir until you hear the locking tabs click, and afterwards connect the electrical connector to the switch.

OEM Chevrolet Cavalier Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
Chevrolet Cavalier Level Sensor
Part Number: 18012741
$14.08 MSRP: $25.15
You Save: $11.07 (45%)
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-2005 Chevrolet Cavalier | Base, CS, LS, LS Sport, RS, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS

Chevrolet Cavalier Brake Fluid Level Sensor

Our website offers an extensive catalog of genuine Chevrolet Cavalier Brake Fluid Level Sensor at unbeatable prices. Every OEM Chevrolet Cavalier Brake Fluid Level Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cavalier Brake Fluid Level Sensor Parts Questions & Experts Answers

Level Sensor
18012741
Q: How to service the Brake Fluid Level Sensor/Switch on Chevrolet Cavalier?
A: To work on the Brake Fluid Level Sensor/Switch, first remove the electrical connector from the fluid level switch . Follow this by pressing the switch locking tabs at the inboard side with needle nose pliers to pry the fluid level switch loose. Insert the fluid level switch into the master cylinder reservoir until you hear the locking tabs click, and afterwards connect the electrical connector to the switch.