How to replace the ABS Control Module on Chevrolet Cavalier?

The replacement process for an ABS Control Module requires you to set the ignition key to OFF to avoid equipment harm. You must first eliminate the Connector Position Assurance (CPA) from the connector lock tab. After that you should press the lock tab and slide the connector cover to disconnect the ABS Control Module harness. The assembly pre-cleaning process should be followed before all four ABS Control Module to BPMV screws are removed while avoiding both tool usage and surface or solenoid valve damage to the BPMV unit when separating components. Clean the ABS Control Module gasket alongside the BPMV surface by using a rag which has alcohol on it. The ABS Control Module installation onto the BPMV must follow by securing it with four screws that need tightening to 5 Nm (44 inch lbs.). Reconnect the ABS Control Module harness while pushing down the lock tab on the harness connector and use the connector cover to close it in the locked position. Then complete the A Diagnostic System Check - ABS while putting the CPA in its proper position.

OEM Chevrolet Cavalier ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 ABS Control Modules found

View related parts
Chevrolet Cavalier Control Module Part Number: 16250119
$332.76 MSRP: $886.73
You Save: $553.97 (63%)
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module
- Replaces: 16221399, 16221409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Cavalier | Base, LS, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 16250059
$407.58 MSRP: $1086.11
You Save: $678.53 (63%)
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Cavalier | Base, LS, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Motor Assembly Part Number: 91172172
$319.52 MSRP: $591.16
You Save: $271.64 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Electronic Brake Control; ABS Pump And Motor Assembly; ABS Control Unit Repair Kit; Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chevrolet Cavalier | Base, LS, RS, Z24 | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Motor Assembly Part Number: 18023770
$166.97 MSRP: $507.20
You Save: $340.23 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Electronic Brake Control; ABS Pump And Motor Assembly; Motor & Pump; Motor Pack; Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Cavalier | Base, LS, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 12231590
Product Specifications
- Other Name: Module Assembly, Electronic Brake & Traction Control; ABS Control Module; Module, Electronic Brake Control
- Replaces: 09387355, 09389278, 12203082, 9387355, 9389278
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Cavalier | Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 16216847
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Cavalier | Base, LS, Z24 | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 16184392
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Cavalier | RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 18078140
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 18078139
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Replaces: 09390865, 09387342, 12203081, 12231591, 9387342, 12223401, 9390865
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Cavalier | Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Motor Assembly Part Number: 18024466
Product Specifications
- Other Name: Motor Kit, Electronic Brake Control; ABS Pump And Motor Assembly; Motor Pack; Master Cylinder Motor; Motor
- Replaces: 18019203, 18018305
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 Chevrolet Cavalier | Base, LS, RS, VL, Z24 | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 16212976
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 Chevrolet Cavalier | RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 16199777
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Cavalier | Base, LS, Z24 | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS
View related parts
Chevrolet Cavalier Control Module Part Number: 16167132
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Cavalier | RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS

Chevrolet Cavalier ABS Control Module

Want to cut long-term maintenance and repair costs? Choose OEM ABS Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cavalier parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cavalier ABS Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Cavalier ABS Control Module refers to the mind of the anti-lock braking systems in the vehicle, highly reliable and performing efficiently in many Chevrolet Cavalier models. This module is very vital in the improvement of the safety of vehicles as it averts wheel locking during hard braking and thereby allowing one to have control and ensure one does not skid. ABS Control Module works simultaneously with the speed sensors and a valve Effective brake pressure is regulated with a pump, and an electronic control unit (ECU). In the course of time, innovations came and new aspects of car safety as well as their driving including the electronic stability control and traction control was added in order to manage the brake force while accelerating. The model of Chevrole Cavalier, built from 1982 by 2005 in North America and later ones in China and Mexico has also been signifying the brand's rigmarole for efficiency coupled with safety. Therefore the ABS Control Module has an ability to control the braking force in accordance with the prevailing road conditions making it a yard stick in automotive markets. However, as it has been observed the ABS as a rule increases manageability and decreases the distance necessary to stop on any type of the route, it is necessary to note that use of this system can result in increase in braking distances on certain types of the surface. In summary, the Chevrolet Cavalier ABS Control Module is yet another embodiment of Chevrolet's commitment to the manufacturing of good and efficient small automobiles for use in different terrains and conditions.

Chevrolet Cavalier ABS Control Module Parts Questions & Experts Answers

Control Module
12231590
Q: How to replace the ABS Control Module on Chevrolet Cavalier?
A:
The replacement process for an ABS Control Module requires you to set the ignition key to OFF to avoid equipment harm. You must first eliminate the Connector Position Assurance (CPA) from the connector lock tab. After that you should press the lock tab and slide the connector cover to disconnect the ABS Control Module harness. The assembly pre-cleaning process should be followed before all four ABS Control Module to BPMV screws are removed while avoiding both tool usage and surface or solenoid valve damage to the BPMV unit when separating components. Clean the ABS Control Module gasket alongside the BPMV surface by using a rag which has alcohol on it. The ABS Control Module installation onto the BPMV must follow by securing it with four screws that need tightening to 5 Nm (44 inch lbs.). Reconnect the ABS Control Module harness while pushing down the lock tab on the harness connector and use the connector cover to close it in the locked position. Then complete the A Diagnostic System Check - ABS while putting the CPA in its proper position.