OEM 2003 Chevrolet Cavalier ABS Control Module

2003 Chevrolet Cavalier Parts Questions & Experts Answers

• Q: How to replace the ABS Control Module on 2003 Chevrolet Cavalier?

  A: The first step for ABS Control Module (ABSCM) replacement requires turning off the ignition switch to avoid equipment destruction. The Connector Position Assurance (CPA) should be removed from the connector lock tab before you push the tab down and slide the connector cover into the open position. The ABSCM harness connector needs detachment before wiping away any built-up dirt or debris from its surface. Screw the four ABSCM to Brake Pressure Modulator Valve (BPMV) screws while being cautious to avoid damaging the BPMV surface and solenoid valves through forceful separation. You should gently unmount the ABSCM from the BPMV. Installation requires the user to clean both ABSCM gasket and BPMV surface with alcohol while using a clean rag followed by attaching the ABSCM to the BPMV. Secure the ABSCM to BPMV with four screws by torquing them to 5 Nm (44 inch lbs.). Complete the ABSCM harness connection by doing yet push down on its harness connector lock tab then slide the connector cover into its locked position. The last step includes putting the CPA in its position followed by a Diagnostic System Check run.