Make sure this part fits

GM 12231590
Control Module

2000-2004 GM

Customer Questions & Expert Answers (7)
GM 12231590 Control Module
GM 12231590 Control Module
  • Part Description
    Module Assembly, Electronic Brake & Traction Control; ABS Control Module
  • Replaces
    09387355, 09389278, 12203082, 9387355, 9389278
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12231590
    Part DescriptionModule Assembly, Electronic Brake & Traction Control; ABS Control Module
    Other NamesModule, Electronic Brake Control
    Item Dimensions6.2 x 6.3 x 5.2 inches
    Item Weight2.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces09387355, 09389278, 12203082, 9387355, 9389278
    ManufacturerGeneral Motors
    SKU12231590
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2004 Chevrolet CavalierBase, LS, LS Sport, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2000-2002 Pontiac SunfireGT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 12231590 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12231590 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the ABS Control Module on Chevrolet Cavalier? Posted by Customer
    A:
    The replacement process for an ABS Control Module requires you to set the ignition key to OFF to avoid equipment harm. You must first eliminate the Connector Position Assurance (CPA) from the connector lock tab. After that you should press the lock tab and slide the connector cover to disconnect the ABS Control Module harness. The assembly pre-cleaning process should be followed before all four ABS Control Module to BPMV screws are removed while avoiding both tool usage and surface or solenoid valve damage to the BPMV unit when separating components. Clean the ABS Control Module gasket alongside the BPMV surface by using a rag which has alcohol on it. The ABS Control Module installation onto the BPMV must follow by securing it with four screws that need tightening to 5 Nm (44 inch lbs.). Reconnect the ABS Control Module harness while pushing down the lock tab on the harness connector and use the connector cover to close it in the locked position. Then complete the A Diagnostic System Check - ABS while putting the CPA in its proper position.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the installation process for the EBCM for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Install the EBCM to the BPMV, then install the four screws attaching the EBCM to BPMV and tighten them to 5 Nm (44 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should you take note of before disconnecting brake pipes for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Take note of the brake pipe locations for reinstallation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    How can you protect electrical connections and painted surfaces during the process for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Use shop cloths, suitable containers, and fender covers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should you do to prepare for the installation of the EBCM for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Clean the sealing surface of the BPMV with denatured alcohol and a clean shop cloth, and if reinstalling the EBCM, also clean its seal and sealing surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done after ensuring the ignition switch is off for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the Connector Position Assurance (CPA) from the connector lock tab, then push the lock tab down and slide the connector cover to the open position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12231590, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12231590 Control Module. It is sometimes referred to as GM ABS Control Module. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12231590 Control Module. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery