How to replace the front brake line on Chevrolet Cavalier?

Before starting the replacement raise and stabilize your vehicle to access the wheels. Thoroughly eliminate all soil and debris from both sides of the brake hose and brake pipe coupling. Via the back up wrench disconnect the brake rod fitting from the hose while sealing its exposed ends with caps to keep fluid inside. Push off the halves of the hose retaining clip from the front brake hose and unscrew the brake caliper bolt. Unfasten the brake hose from the caliper. Get rid of the 2 stuck copper gaskets between the caliper and hose ends then seal both parts with caps to keep brake fluid inside. Before installing the brake hose break loose the protective caps then fit brand new copper brake hose gaskets before replacement. Position the brake hose gaskets and bolt on the hose flat surface before sliding the device through the caliper fixture. Tighten the brake hose-to-caliper bolt to 50 nm (37 lb ft) pressure without twisting the hose during installation. Fit the brake hose to the bracket and fasten it using the hose retaining clip. Connect the brake pipe fitting to the front brake hose using a back up wrench with your effort amounting to 23 nm (17 lb ft). Replace the tire and wheel parts with care by keeping the hose away from suspension components when turning sharply to the right and left; fix the issue and return the hose if necessary. Complete the brake service by pumping and lowering the vehicle.

OEM Chevrolet Cavalier Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
Chevrolet Cavalier Flex Hose, Passenger Side
Part Number: 22112404
$26.99 MSRP: $42.12
You Save: $15.13 (36%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Cavalier | RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Flex Hose
Part Number: 9768144
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose; Hose, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Flex Hose, Rear
Part Number: 19366662
Product Specifications
- Other Name: Hose Assembly, Rear Brake Crossover; Hydraulic Hose; Brake Hose; Brake Line; Hose; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 17999969, 22111811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-2005 Chevrolet Cavalier | Base, CL, CS, LS, LS Sport, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Flex Hose
Part Number: 9768127
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose; Hose, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Flex Hose, Driver Side
Part Number: 22112403
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Cavalier | RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Flex Hose, Front
Part Number: 19366738
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22163193, 22708929, 17999710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cavalier Brake Line

Our website offers an extensive catalog of genuine Chevrolet Cavalier Brake Line at unbeatable prices. Every OEM Chevrolet Cavalier Brake Line comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cavalier Brake Line Parts Questions & Experts Answers

Flex Hose, Front
19366738
Q: How to replace the front brake line on Chevrolet Cavalier?
A: Before starting the replacement raise and stabilize your vehicle to access the wheels. Thoroughly eliminate all soil and debris from both sides of the brake hose and brake pipe coupling. Via the back up wrench disconnect the brake rod fitting from the hose while sealing its exposed ends with caps to keep fluid inside. Push off the halves of the hose retaining clip from the front brake hose and unscrew the brake caliper bolt. Unfasten the brake hose from the caliper. Get rid of the 2 stuck copper gaskets between the caliper and hose ends then seal both parts with caps to keep brake fluid inside. Before installing the brake hose break loose the protective caps then fit brand new copper brake hose gaskets before replacement. Position the brake hose gaskets and bolt on the hose flat surface before sliding the device through the caliper fixture. Tighten the brake hose-to-caliper bolt to 50 nm (37 lb ft) pressure without twisting the hose during installation. Fit the brake hose to the bracket and fasten it using the hose retaining clip. Connect the brake pipe fitting to the front brake hose using a back up wrench with your effort amounting to 23 nm (17 lb ft). Replace the tire and wheel parts with care by keeping the hose away from suspension components when turning sharply to the right and left; fix the issue and return the hose if necessary. Complete the brake service by pumping and lowering the vehicle.