What Tools Are Required to Service and Repair Brake Calipers on Chevrolet Cavalier?

A caliper piston seal installer bearing the code j29077-a is essential for caliper brake repair work. Detach the brake caliper from the vehicle using tools and release the Brake Caliper Piston from the bore by passing weak compressed air through the fluid inlet hole. Utilize a small plastic or wooden item to take the piston dust boot seal out from the sealing recess of the caliper. Then remove and discard the piston seal from the caliper bore. Disconnect the caliper bleeder valve and its dust cap. Use denatured alcohol or equivalent to clean the Brake Caliper Piston bore seal counterbore and piston. Dry the parts using filtered non-lubricated air. Study the caliper opening for damages like cracks, scoring, away and rust presence. Light rust buildup can be brushed off with fine sandpaper while heavy damage demands a new part set. Check the caliper piston for cracks and assess any damage to chrome plating before replacing it with a new part. Apply delco supreme ii brake fluid (GM P/N 12377967) or its equivalent from a sealed clean container to the piston seal. Install the lubricated piston seal into the caliper bore before placing both the caliper piston and its dust boot seal. Install the new piston dust boot seal onto the piston then position the caliper piston seal installer tool j29077-a to press-fit the dust boot seal firmly. Reconnect the front brake caliper to its position by tightening its bleeder valve before installing a caliper cap properly.

OEM Chevrolet Cavalier Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Calipers found

View related parts
Chevrolet Cavalier Caliper, Front Passenger Side
Part Number: 19141027
$46.24 MSRP: $84.05
You Save: $37.81 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly, Front Brake (W/O Brake Pads) (Remanufacture); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 18017234, 18036711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Cavalier | Base, RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Caliper, Front Driver Side
Part Number: 19141026
$46.24 MSRP: $84.05
You Save: $37.81 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly, Front Brake (W/O Brake Pads) (Remanufacture); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 18036712, 18017233
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Cavalier | Base, RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Caliper, Front
Part Number: 19140969
$46.08 MSRP: $84.05
You Save: $37.97 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly, Front Brake (W/O Brake Pads) (Remanufacture); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 18036564, 18060113, 18015753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Caliper, Front
Part Number: 19140968
$46.08 MSRP: $84.02
You Save: $37.94 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly, Front Brake (W/O Brake Pads) (Remanufacture); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 18015752, 18060112, 18036565
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Caliper Assembly, Front
Part Number: 18029941
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 18018316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, VL, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Caliper Assembly, Front
Part Number: 18029940
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 18018315
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, VL, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Overhaul Kit, Front
Part Number: 18018317
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Overhaul Kit; Caliper Kit, Wheel Brake Cylinder/Caliper Piston; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 18023366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2004 Chevrolet Cavalier | Base, LS, LS Sport, RS, VL, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

Chevrolet Cavalier Brake Calipers

Our website offers an extensive catalog of genuine Chevrolet Cavalier Brake Calipers at unbeatable prices. Every OEM Chevrolet Cavalier Brake Calipers comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cavalier Brake Calipers Parts Questions & Experts Answers

Caliper Assembly, Front
18029941
Q: What Tools Are Required to Service and Repair Brake Calipers on Chevrolet Cavalier?
A: A caliper piston seal installer bearing the code j29077-a is essential for caliper brake repair work. Detach the brake caliper from the vehicle using tools and release the Brake Caliper Piston from the bore by passing weak compressed air through the fluid inlet hole. Utilize a small plastic or wooden item to take the piston dust boot seal out from the sealing recess of the caliper. Then remove and discard the piston seal from the caliper bore. Disconnect the caliper bleeder valve and its dust cap. Use denatured alcohol or equivalent to clean the Brake Caliper Piston bore seal counterbore and piston. Dry the parts using filtered non-lubricated air. Study the caliper opening for damages like cracks, scoring, away and rust presence. Light rust buildup can be brushed off with fine sandpaper while heavy damage demands a new part set. Check the caliper piston for cracks and assess any damage to chrome plating before replacing it with a new part. Apply delco supreme ii brake fluid (GM P/N 12377967) or its equivalent from a sealed clean container to the piston seal. Install the lubricated piston seal into the caliper bore before placing both the caliper piston and its dust boot seal. Install the new piston dust boot seal onto the piston then position the caliper piston seal installer tool j29077-a to press-fit the dust boot seal firmly. Reconnect the front brake caliper to its position by tightening its bleeder valve before installing a caliper cap properly.