How to replace the front brake line on 2001 Chevrolet Cavalier?

To replace the front brake hose, the vehicle should be raised and supported, the tire and wheel removed, exerting care to clean any dirt, grease, and foreign substance from the hose fittings at the two ends of the brake hose. Unplug the front brake from the brake hose, after that remove the retaining nut and clip, as well as the retaining bolt and bracket of the front brake hose. Then remove the keep bolts for the front brake caliper and the front brake hose gaskets before extracting the front brake hose from the vehicle. For fitting, fit new gaskets onto the front brake hose and secure it to the caliper, after securing retaining bolt to 50 nm (37 ft. Lbs). Set the retaining clip and make sure that the brake hose is not twisted or in contact of the suspension components, and attach the front pipe of brakes to the front brake hose, tightening it up to 20 nm (15 ft. Lbs.). Finally bleed the brake hydraulic system, reassembling the tire/wheel and lowering the vehicle.

OEM 2001 Chevrolet Cavalier Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Lines found

View related parts
2001 Chevrolet Cavalier Flex Hose, Rear
Part Number: 19366662
Product Specifications
- Other Name: Hose Assembly, Rear Brake Crossover; Hydraulic Hose; Brake Hose; Brake Line; Hose; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 17999969, 22111811
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.3 x 1.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, CL, CS, LS, LS Sport, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
2001 Chevrolet Cavalier Flex Hose, Front
Part Number: 19366738
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22163193, 22708929, 17999710
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 1.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19366738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2001 Chevrolet Cavalier Brake Line

With a comprehensive array of OEM 2001 Chevrolet Cavalier Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Cavalier Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Cavalier Brake Line Parts Questions & Experts Answers

Q: How to replace the front brake line on 2001 Chevrolet Cavalier?
A: To replace the front brake hose, the vehicle should be raised and supported, the tire and wheel removed, exerting care to clean any dirt, grease, and foreign substance from the hose fittings at the two ends of the brake hose. Unplug the front brake from the brake hose, after that remove the retaining nut and clip, as well as the retaining bolt and bracket of the front brake hose. Then remove the keep bolts for the front brake caliper and the front brake hose gaskets before extracting the front brake hose from the vehicle. For fitting, fit new gaskets onto the front brake hose and secure it to the caliper, after securing retaining bolt to 50 nm (37 ft. Lbs). Set the retaining clip and make sure that the brake hose is not twisted or in contact of the suspension components, and attach the front pipe of brakes to the front brake hose, tightening it up to 20 nm (15 ft. Lbs.). Finally bleed the brake hydraulic system, reassembling the tire/wheel and lowering the vehicle.