How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Cavalier?

You can start working on valve stem oil seals when you eliminate the valve Rocker Arm cover first. Pull the spark plugs only when the engine temperature has dropped to protect against damaged threads or cylinder head. Place the Spark Plug apart while you gather all valve train pieces before you start. Take off the Rocker Arm and Pushrod from the engine cylinder you will repair. Insert the Spark Plug port adapter (J 23590) in the Spark Plug port to keep valves open before pressing air through them. Put the valve spring compressor (J 5892-D) onto the valve spring to compress it while also taking both valve locks and the cap off. Remove the valve spring compressor (J 5892-D) handle and take away the valve spring beside the spring seat oil seal. Begin setting the new Valve Stem Oil Seal onto the spring seat before installing it onto the assembly. Place the valve parts in their setup before using the valve spring compressor (J 5892-D) to squeeze the valve spring downward. Verify the valve locks rest firmly in their position at the top of the valve stem while you remove the compressor tool. Use grease as needed to support the valve locks while you end the operation. Put valve locks into position and slowly take off the valve spring compressor (J 5892-D) tool before taking out the Spark Plug port adapter (J 23590). Set the Spark Plug into place before tightening it to 15 nm (11 ft. Lbs.) while adding the Rocker Arm and Pushrod components before placing back the valve Rocker Arm cover.

OEM Chevrolet Cavalier Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Valve Stem Oil Seals found

View related parts
Chevrolet Cavalier Valve Seals, Green Line Part Number: 90537241
$4.94 MSRP: $7.73
You Save: $2.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 10212810
$5.08 MSRP: $7.97
You Save: $2.89 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Valve Seal Kit
- Replaces: 00460483, 460483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1986 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, Z24 | 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 90215296
$4.57 MSRP: $7.16
You Save: $2.59 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 94656542
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1989 Chevrolet Cavalier | Base, CS, RS, VL | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 88891778
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 24572068
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Cavalier | LS, LS Sport, Z24 | 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 470110
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal Unit-Inlet Valve Stem Oil /Standard/ (Free Of Asbestos); Valve Stem Seal; Intake Valve Seals; Seal Kit, Engine Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet Cavalier | Base, CL, CS, Olympic, RS, Type-10, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 364799
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Exhaust Valve Stem Oil; Valve Stem Seal; Exhaust Valve Seals; Seal, Engine Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Cavalier | RS, VL | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 10198818
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals; Intake Valve Seals
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Cavalier | RS, VL | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 22531217
$0.18 MSRP: $0.28
You Save: $0.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 10131082
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Cavalier | LS, Z24 | 4 Cyl 2.3 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 94646766
Product Specifications
- Other Name: Seal, Valve Stem; Valve Stem Seal; Seal, Engine Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1986 Chevrolet Cavalier | Base, CL, CS, Olympic, RS, Type-10 | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 14091807
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1994 Chevrolet Cavalier | Base, CS, RS, Z24 | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Valve Seals Part Number: 12338014
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Cavalier | RS, Z24 | 6 Cyl 3.1 L GAS

Chevrolet Cavalier Valve Stem Oil Seal

Want to cut long-term maintenance and repair costs? Choose OEM Valve Stem Oil Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cavalier parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cavalier Valve Stem Oil Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Cavalier Valve Stem Oil Seal Parts and Q&A

Valve Seals, Green Line
90537241
Q: How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Cavalier?
A:
You can start working on valve stem oil seals when you eliminate the valve Rocker Arm cover first. Pull the spark plugs only when the engine temperature has dropped to protect against damaged threads or cylinder head. Place the Spark Plug apart while you gather all valve train pieces before you start. Take off the Rocker Arm and Pushrod from the engine cylinder you will repair. Insert the Spark Plug port adapter (J 23590) in the Spark Plug port to keep valves open before pressing air through them. Put the valve spring compressor (J 5892-D) onto the valve spring to compress it while also taking both valve locks and the cap off. Remove the valve spring compressor (J 5892-D) handle and take away the valve spring beside the spring seat oil seal. Begin setting the new Valve Stem Oil Seal onto the spring seat before installing it onto the assembly. Place the valve parts in their setup before using the valve spring compressor (J 5892-D) to squeeze the valve spring downward. Verify the valve locks rest firmly in their position at the top of the valve stem while you remove the compressor tool. Use grease as needed to support the valve locks while you end the operation. Put valve locks into position and slowly take off the valve spring compressor (J 5892-D) tool before taking out the Spark Plug port adapter (J 23590). Set the Spark Plug into place before tightening it to 15 nm (11 ft. Lbs.) while adding the Rocker Arm and Pushrod components before placing back the valve Rocker Arm cover.