How to replace the Cam Gear and timing chain sprockets on Chevrolet Corvette?

You need to begin the Timing Chain and sprocket replacement process by removing the Oil Pump followed by the camshaft sprocket bolts and finally the camshaft sprocket and Timing Chain. The j8433 (Pulley Puller) and j41816-2 (Crankshaft End Protector) and j41558 (Crankshaft Sprocket Remover) should be used to remove the Crankshaft sprocket followed by removal of the Crankshaft sprocket key when needed. Check the quality of the Timing Chain while examining its sprockets prior to starting the installation process. The key must be reinstalled into the keyway of the Crankshaft until the ends fully seat. Mount the Crankshaft sprocket onto the Crankshaft front surface through precise key alignment between the parts before using the j41665 to fully connect it against the Crankshaft flange. The rotative motion of the Crankshaft sprocket should position its alignment mark at the 12 o'clock angle while the locating pin of the camshaft sprocket lines up with the camshaft sprocket alignment hole and sprocket teeth properly mesh with the Timing Chain. After aligning the camshaft with the Crankshaft sprocket marks properly you should install the camshaft sprocket with its Timing Chain while making minor adjustments to line up the timing marks. You should install the camshaft sprocket bolts followed by tightening them to 35 nm (26 ft. Lbs.) before reinstalling the Oil Pump.

OEM Chevrolet Corvette Cam Gear

Camshaft Gear

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Cam Gears found

View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 340235
$58.88 MSRP: $92.23
You Save: $33.35 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket, Camshaft; Variable Valve Timing Sprocket; Timing Gear; Cam Gear; Timing Gear Set; Sprocket, Engine Camshaft; Gear, Engine Camshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1986 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Actuator
Part Number: 12662599
$157.07 MSRP: $247.13
You Save: $90.06 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Engine Camshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 12623368
$147.88 MSRP: $251.79
You Save: $103.91 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Engine Camshaft; Variable Valve Timing Sprocket; Cam Gear; Actuator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 12591689
$23.14 MSRP: $38.11
You Save: $14.97 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket, Engine Camshaft; Timing Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Corvette | Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 12586481
$32.64 MSRP: $53.78
You Save: $21.14 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket, Engine Camshaft; Variable Valve Timing Sprocket; Cam Gear; Timing Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Actuator
Part Number: 12689341
$118.52 MSRP: $188.17
You Save: $69.65 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Engine Camshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chevrolet Corvette | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 12623754
$26.48 MSRP: $41.48
You Save: $15.00 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket, Engine Camshaft; Variable Valve Timing Sprocket; Cam Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 12576407
$34.88 MSRP: $59.89
You Save: $25.01 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket, Engine Camshaft; Variable Valve Timing Sprocket; Timing Gear; Cam Gear; Timing Gear Set; Sprocket
- Replaces: 12552953
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 10128349
$25.20 MSRP: $39.48
You Save: $14.28 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket, Engine Camshaft; Variable Valve Timing Sprocket; Cam Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Corvette | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 10206039
Product Specifications
- Other Name: Sprocket, Engine Camshaft; Variable Valve Timing Sprocket; Timing Gear; Cam Gear; Timing Gear Set
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Corvette | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Camshaft Gear
Part Number: 10106162
Product Specifications
- Other Name: Sprocket, Camshaft; Variable Valve Timing Sprocket; Cam Gear; Sprocket, Engine Camshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS

Chevrolet Corvette Cam Gear

Our website offers an extensive catalog of genuine Chevrolet Corvette Cam Gear at unbeatable prices. Every OEM Chevrolet Corvette Cam Gear comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Corvette Cam Gear Parts Questions & Experts Answers

Camshaft Gear
12576407
Q: How to replace the Cam Gear and timing chain sprockets on Chevrolet Corvette?
A: You need to begin the Timing Chain and sprocket replacement process by removing the Oil Pump followed by the camshaft sprocket bolts and finally the camshaft sprocket and Timing Chain. The j8433 (Pulley Puller) and j41816-2 (Crankshaft End Protector) and j41558 (Crankshaft Sprocket Remover) should be used to remove the Crankshaft sprocket followed by removal of the Crankshaft sprocket key when needed. Check the quality of the Timing Chain while examining its sprockets prior to starting the installation process. The key must be reinstalled into the keyway of the Crankshaft until the ends fully seat. Mount the Crankshaft sprocket onto the Crankshaft front surface through precise key alignment between the parts before using the j41665 to fully connect it against the Crankshaft flange. The rotative motion of the Crankshaft sprocket should position its alignment mark at the 12 o'clock angle while the locating pin of the camshaft sprocket lines up with the camshaft sprocket alignment hole and sprocket teeth properly mesh with the Timing Chain. After aligning the camshaft with the Crankshaft sprocket marks properly you should install the camshaft sprocket with its Timing Chain while making minor adjustments to line up the timing marks. You should install the camshaft sprocket bolts followed by tightening them to 35 nm (26 ft. Lbs.) before reinstalling the Oil Pump.