How to Properly Service a TPMS Sensor on a Chevrolet Equinox?

Start the tire pressure indicator sensor replacement by mounting the vehicle on a proper support. Remove the tire/wheel assembly that sits on the vehicle. Set the sensor's cap and valve on a dry clean surface before tire removal because aluminum forms the cap while nickel plating protects the valve from corrosion. The sensor replacement requires using only original components because material substitutions are prohibited. To successfully separate the tire bead from the wheel point the bead breaking fixture at 90 degrees toward the valve stem then gently drive the tire iron or pry bar counterclockwise of the sensor body as you pry the tire bead over the mounting/dismounting head. Rotate the tire/wheel assembly through complete turns using the tire machine until the tire bead moves to the wheel rim's external portion followed by moving the second bead to the rim's inside edge. Before reinstalling the tire you should eliminate tire sealant from inside wheel surfaces. Following removal of the tire pressure sensor nut comes sensor removal. Clean the grommet sealing area from dirt then insert the sensor through the wheel hole with air passage pointed away from the wheel. Torque the sensor nut to 7 Nm (62 lb in) while maintaining the sensor body parallel to the inside wheel surface. To replace the tire begin by orienting the mounting/dismounting tool 180 degrees from the valve stem and positioning the bead transition area 45 degrees offset to the left of the valve stem. Continue rotating the tire/wheel setup clockwise during the tire bead transition into the wheel rim then perform the same process for the external bead. The service replacement tire pressure sensor comes in OFF mode so you must spin the wheel above 32 km/h (20 mph) for at least 10 seconds to trigger the internal roll switch. Place the tire/wheel assembly onto the vehicle followed by vehicle lowering and sensor learning of tire pressure sensors.

OEM Chevrolet Equinox TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 TPMS Sensors found

View related parts
Chevrolet Equinox TPMS Sensor
Part Number: 15921013
$73.70 MSRP: $144.28
You Save: $70.58 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Capteur; Tire Pressure Sensor; Tire Sensor; Pressure Sensor; Sensor; Sensor, Tire Pressure
- Replaced by: 20925924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Tire Pressure Sensor, Black
Part Number: 13598909
$10.46 MSRP: $19.64
You Save: $9.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit, Tire Valve And Cover Lock; TPMS Sensor Service Kit; TPMS Sensor; Valve Stem; Repair Kit; Tire Sensor Valve; TPMS Sensor Valve Assembly; Tire Valve Kit; Vehicle Security & Safety.
- Replaces: 15263240, 19368646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2024 Chevrolet Equinox | L, LS, LT, LTZ, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox TPMS Sensor Nut
Part Number: 25976357
$3.15 MSRP: $5.62
You Save: $2.47 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut, Tire Pressure; TPMS Sensor Service Kit; Pressure Sensor Nut; Valve Assembly Nut; Tire Sensor Nut
- Replaces: 15242789
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox TPMS Sensor
Part Number: 19332370
$26.21 MSRP: $40.00
You Save: $13.79 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Package, Vehicle Security & Safety; Tire Pressure Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaced by: 84413363
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox TPMS Sensor
Part Number: 13540604
$53.59 MSRP: $104.00
You Save: $50.41 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13528566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox TPMS Sensor
Part Number: 13540607
$27.15 MSRP: $50.98
You Save: $23.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13512346
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Equinox | LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Control Module
Part Number: 20803736
$62.60 MSRP: $172.07
You Save: $109.47 (64%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Receiver, Door Lock Remote Control Inside; Receiver; Receiver, Door Electric And Vacuum Locks; Module, Tire Pressure; Harness, Dome Lamp
- Replaces: 15807815, 15857830, 25896540, 15946937, 25857326, 25856131, 25808836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox TPMS Sensor
Part Number: 13540601
$56.06 MSRP: $108.80
You Save: $52.74 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Tire Pressure Indicator; Tire Pressure Sensor; Valve Stem; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 12768826, 13598772, 13589597, 22854866, 20922900, 13589255, 13581558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Chevrolet Equinox TPMS Sensor

Our website offers an extensive catalog of genuine Chevrolet Equinox TPMS Sensor at unbeatable prices. Every OEM Chevrolet Equinox TPMS Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Equinox TPMS Sensor Parts Questions & Experts Answers

TPMS Sensor
15921013
Q: How to Properly Service a TPMS Sensor on a Chevrolet Equinox?
A: Start the tire pressure indicator sensor replacement by mounting the vehicle on a proper support. Remove the tire/wheel assembly that sits on the vehicle. Set the sensor's cap and valve on a dry clean surface before tire removal because aluminum forms the cap while nickel plating protects the valve from corrosion. The sensor replacement requires using only original components because material substitutions are prohibited. To successfully separate the tire bead from the wheel point the bead breaking fixture at 90 degrees toward the valve stem then gently drive the tire iron or pry bar counterclockwise of the sensor body as you pry the tire bead over the mounting/dismounting head. Rotate the tire/wheel assembly through complete turns using the tire machine until the tire bead moves to the wheel rim's external portion followed by moving the second bead to the rim's inside edge. Before reinstalling the tire you should eliminate tire sealant from inside wheel surfaces. Following removal of the tire pressure sensor nut comes sensor removal. Clean the grommet sealing area from dirt then insert the sensor through the wheel hole with air passage pointed away from the wheel. Torque the sensor nut to 7 Nm (62 lb in) while maintaining the sensor body parallel to the inside wheel surface. To replace the tire begin by orienting the mounting/dismounting tool 180 degrees from the valve stem and positioning the bead transition area 45 degrees offset to the left of the valve stem. Continue rotating the tire/wheel setup clockwise during the tire bead transition into the wheel rim then perform the same process for the external bead. The service replacement tire pressure sensor comes in OFF mode so you must spin the wheel above 32 km/h (20 mph) for at least 10 seconds to trigger the internal roll switch. Place the tire/wheel assembly onto the vehicle followed by vehicle lowering and sensor learning of tire pressure sensors.

Related Chevrolet Equinox Parts

Browse Chevrolet Equinox TPMS Sensor by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007