How to Replace A/C Compressor Cut-Out Switches for High Pressure Switch on Chevrolet Express 1500?

The first step to switch out the a/c high pressure switch requires a/c system refrigerant recovery. The cleaning process must happen first before the snap ring removal step so the high pressure switch electrical connector needs disconnection. Create the a/c high pressure switch removal process by using snap ring pliers (J 5403) along with removing the snap ring to extract the switch from the compressor. Either the o-ring remover (J 9553-01) or another o-ring tool can be used to remove the old o-ring seal from the switch cavity. Inspect both the cavity and the o-ring groove thoroughly for any foreign or dirty material before cleaning as required. The installation requires new 525 viscosity refrigerant oil for lubricating an o-ring before positioning it into the switch cavity groove. Apply the same oil to the control switch housing before fully inserting it into the cavity when the switch reaches its lowest point. To install the snap ring use snap ring pliers (J 5403) by placing its high part facing the switch housing into the retaining groove with precision placement. The a/c system evacuation follows by recharging operations then comes a leak test of fittings using the halogen leak detector (J 39400-A).

OEM Chevrolet Express 1500 A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Compressor Cut-Out Switches found

View related parts
Chevrolet Express 1500 A/C Switch
Part Number: 15144494
$37.29 MSRP: $76.63
You Save: $39.34 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Air Conditioner Compressor; A/C Cut-Out Switch; HVAC Pressure Switch; System Switch; Pressure Cycling Switch; Lower Pressure Cut-Off; A/C Electric Temperature Control; A/C Compressor Switch.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2014 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Express 1500 Pressure Relief Valve, Green Line
Part Number: 13587668
$47.40 MSRP: $97.41
You Save: $50.01 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-A/C Refrigerant Pressure; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; HVAC System Switch; Pressure Switch; Refrigerant Pressure Sensor; Cut-Off Switch; A/C Electric Temperature Sensor; A/C Compressor Switch.
- Replaces: 13502759, 22634172, 13502758, 22678731
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Express 1500 High Pressure Cut-Off Switch
Part Number: 89019183
$48.11 MSRP: $98.86
You Save: $50.75 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, A/C Compressor High Pressure Cut Off; HVAC Pressure Switch; Pressure Cut-Off Switch; A/C Electric Temperature & Motor Control; A/C Compressor Switch Kit.
- Replaces: 02724727, 02724863, 2724727, 2724863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Express 1500 A/C Switch
Part Number: 15035084
$46.28 MSRP: $86.89
You Save: $40.61 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Air Conditioner Compressor; A/C Cut-Out Switch; HVAC Pressure Switch; System Switch; Pressure Cycling Switch; Switch, A/C Electric Temperature And Motor Control; Switch, A/C Compressor (Internal Parts)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2008 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Express 1500 Pressure Cycling Switch
Part Number: 52473139
$27.39 MSRP: $51.44
You Save: $24.05 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch, Air Conditioner Compressor; A/C Cut-Out Switch; HVAC Pressure Switch; System Switch; Lower Pressure Cut-Off Switch; Switch, A/C Compressor (Internal Parts)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Express 1500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Express 1500 A/C Compressor Cut-Out Switches

Our website offers an extensive catalog of genuine Chevrolet Express 1500 A/C Compressor Cut-Out Switches at unbeatable prices. Every OEM Chevrolet Express 1500 A/C Compressor Cut-Out Switches comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Express 1500 A/C Compressor Cut-Out Switches Parts Questions & Experts Answers

Pressure Relief Valve, Green Line
13587668
Q: How to Replace A/C Compressor Cut-Out Switches for High Pressure Switch on Chevrolet Express 1500?
A: The first step to switch out the a/c high pressure switch requires a/c system refrigerant recovery. The cleaning process must happen first before the snap ring removal step so the high pressure switch electrical connector needs disconnection. Create the a/c high pressure switch removal process by using snap ring pliers (J 5403) along with removing the snap ring to extract the switch from the compressor. Either the o-ring remover (J 9553-01) or another o-ring tool can be used to remove the old o-ring seal from the switch cavity. Inspect both the cavity and the o-ring groove thoroughly for any foreign or dirty material before cleaning as required. The installation requires new 525 viscosity refrigerant oil for lubricating an o-ring before positioning it into the switch cavity groove. Apply the same oil to the control switch housing before fully inserting it into the cavity when the switch reaches its lowest point. To install the snap ring use snap ring pliers (J 5403) by placing its high part facing the switch housing into the retaining groove with precision placement. The a/c system evacuation follows by recharging operations then comes a leak test of fittings using the halogen leak detector (J 39400-A).