Other Name: Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling; Tube, Heater Blower Motor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2014 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hoses; Hose, A/C Compressor Suction And Discharge
Replaces: 15963912, 15026430
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2000 Chevrolet Express 1500 | Base, LS | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Chevrolet Express 1500 A/C Hose
Our website offers an extensive catalog of genuine Chevrolet Express 1500 A/C Hose at unbeatable prices. Every OEM Chevrolet Express 1500 A/C Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Express 1500 A/C Hose Parts Questions & Experts Answers
Q: How to replace the front A/C Hose in an evaporator system on Chevrolet Express 1500?
A: Recovery of refrigerant from the a/c system starts the replacement process of the front evaporator tube. The next action is to remove the coolant recovery reservoir together with the grille. To begin the replacement the front evaporator hose nut should be detached from the condenser before removing the evaporator inlet hose nut from the front evaporator tube hose. Disassemble the front hose evaporator inlet hose from the nipple and the tube between the rear of the evaporator. Pull out the front evaporator hose from the vehicle before you uninstall the sealing washers. Set the new sealing washers while inserting the front evaporator tube into the vehicle to connect with the rear evaporator tube. Fasten the rear evaporator tube retaining nut with 16 n.m torque while maintaining a 12 lb ft force. Next proceed with the attachment of the evaporator inlet hose to the front evaporator tube and secure it with the evaporator inlet hose nut to 16 n.m (12 lb ft). The front evaporator tube requires connection to the condenser while using the front evaporator tube nut to secure it with torque set to 16 n.m (12 lb ft). The procedure ends with reinstallation of the grille and coolant recovery reservoir followed by a/c system evacuation and recharging while using the halogen leak detector (J 39400-A) for the components' fittings leak inspection.