OEM Chevrolet Express 2500 Cruise Control Module

Chevrolet Express 2500 Cruise Control Module Parts and Q&A

• Control Module
  15752335
  Q: How to replace the cruise control module on Chevrolet Express 2500?

  A:

  First of all, lift and support the hood off and remove the air cleaner assembly from the vehicle to replace the Cruise Control Module. For the 4.3l and for 4.8l, 5.3l and 6.0l engines disconnect the electrical connector from Cruise Control Module and cruise control cable from Cruise Control Module. Estimate the amounts to be printed based on the product price and the sizes of the coupons.ysical coupons will require you to assign staff to do each task. this benefit saves both the organisations and departments a ton of irritation concerning air conditions, air organization, air freshening filters in autos, keeping tires intact and also the many air conditioners that are functional for use. In terms of installation, reinstall the Cruise Control Module in the vehicle back on the cruise control bracket and tightened with the two nuts to 5 n.m (44 lb in), as pointed out by the fastener notice in service precautions. Next, attach the cruise control cable and the electrical connector with the Cruise Control Module, reinstall the air cleaner assembly, and finally closing the hood.
• Control Module
  25315088
  Q: How to service the Cruise Control Module on Chevrolet Express 2500?

  A:

  The Cruise Control Module service process starts by raising and supporting the hood followed by air cleaner assembly removal from the vehicle. First disconnect both the electrical connector and the cruise control cable attached to the Cruise Control Module. Remove the two nuts from the Cruise Control Module to the cruise control bracket and carefully extract the Cruise Control Module from both components. To install the Cruise Control Module position it first into the vehicle bracket system after placing the unit on the cruise control bracket. Tighten the two mounting nuts that attach the Cruise Control Module to the cruise control bracket while using a 5 n.m torque wrench (44 lb in). To complete this task reconnect the electrical connector and cruise control cable to the Cruise Control Module before reinstalling the air cleaner assembly. The hood closure follows as the last step.