How to replace the front door striker on Chevrolet Lumina?

The front door striker replacement process begins with the necessary mark of the striker position before proceeding to remove the anchor plate and body lock pillar. Begin by marking the striker position before proceeding to remove its screws then extract the striker. You should remove both the spacers along with the washer if required. Start the installation process by setting the washer into place after which you should add the spacers according to requirement followed by positioning the striker at the designated mark. Screw in the striker screws allowing them to reach a torque value of 24 N.m (18 lb ft). Last, inspect the striker and refer to Door Lock Striker Adjustment procedures with or without Mini Wedge for any needed adjustments.

OEM Chevrolet Lumina Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Strikers found

View related parts
Chevrolet Lumina Striker, Rear
Part Number: 20597659
$29.98
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker, Rear Compartment Lid; Striker, Rear Compartment Lid Lock Or Liftgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1994 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Lock Striker
Part Number: 20464563
Product Specifications
- Other Name: Striker, Door Lock Striker; Lock Cylinder Striker; Actuator Striker; Striker Washer; Striker; Striker Kit, Door Lock Striker
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1994 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Striker, Black
Part Number: 16629888
Product Specifications
- Other Name: Striker, Door Lock Striker
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Striker, Rear
Part Number: 10273674
Product Specifications
- Other Name: Striker-Rear Compartment Lid Lock; Striker, Rear Compartment Lid Lock Or Liftgate
- Position: Rear
- Replaces: 10124770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Striker
Part Number: 10060782
Product Specifications
- Other Name: Striker, Instrument Panel Compartment Door Lock And Console Compartment Door Lock
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1994 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

Chevrolet Lumina Door Striker

Our website offers an extensive catalog of genuine Chevrolet Lumina Door Striker at unbeatable prices. Every OEM Chevrolet Lumina Door Striker comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Lumina Door Striker Parts Questions & Experts Answers

Striker, Black
16629888
Q: How to replace the front door striker on Chevrolet Lumina?
A: The front door striker replacement process begins with the necessary mark of the striker position before proceeding to remove the anchor plate and body lock pillar. Begin by marking the striker position before proceeding to remove its screws then extract the striker. You should remove both the spacers along with the washer if required. Start the installation process by setting the washer into place after which you should add the spacers according to requirement followed by positioning the striker at the designated mark. Screw in the striker screws allowing them to reach a torque value of 24 N.m (18 lb ft). Last, inspect the striker and refer to Door Lock Striker Adjustment procedures with or without Mini Wedge for any needed adjustments.