How to replace the front sway bar link on Chevrolet Malibu?

You should start by lifting and supporting the vehicle to change the Sway Bar Link. The next step requires tire and wheel component removal. Remove all material debris from around the Sway Bar Link bolt threads before starting with replacement tasks. Use the appropriate wrench of the right size to grasp the sway bar bolt thus removing the sway bar nut. First remove the insulator and washer from the Sway Bar Link bolt and then detach the bolt with the insulator and washer. The installation process requires the removal of both insulators and also the spacer. During installation place the washer and insulator onto the Sway Bar Link bolt while verifying that the insulators fit correctly within the sway bar then the lower Control Arm. Install the insulators and spacer on the sway bar between the lower Control Arm while using the sway bar bolt to position them when installing. Fasten the Sway Bar Link bolt with its washer and insulator before installing the insulator together with its washer. Fasten the Sway Bar Link nut to enable a torque of 23 n.m (17 lb ft). After installing the tire and wheel assembly it is necessary to remove the support before lowering the vehicle.

OEM Chevrolet Malibu Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Sway Bar Links found

View related parts
Chevrolet Malibu Stabilizer Link, Driver Side
Part Number: 22601060
$13.23 MSRP: $26.58
You Save: $13.35 (51%)
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Stabilizer Link
Part Number: 13219141
$26.73 MSRP: $50.18
You Save: $23.45 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Malibu | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Stabilizer Link, Rear
Part Number: 84451421
$21.73 MSRP: $40.80
You Save: $19.07 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
- Position: Rear
- Replaces: 23384634
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Stabilizer Link, Green Line
Part Number: 22670300
$48.91 MSRP: $94.94
You Save: $46.03 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Front
- Replaces: 25846008
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2010 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Stabilizer Link
Part Number: 20961222
$25.14 MSRP: $47.22
You Save: $22.08 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Control Arm; Sway Bar Link; Link
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Stabilizer Link, Passenger Side
Part Number: 84871565
$13.17 MSRP: $24.73
You Save: $11.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Passenger Side
- Replaced by: 42830571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Stabilizer Link, Driver Side
Part Number: 84871564
$12.46 MSRP: $22.55
You Save: $10.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Driver Side
- Replaced by: 42815865
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Stabilizer Link, Rear
Part Number: 13281792
$21.83 MSRP: $41.00
You Save: $19.17 (47%)
ADD TO CART
Product Specifications
- Other Name: Link Assembly-Rear Stabilizer Shaft; Link; Link, Stabilizer Shaft
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Stabilizer Link, Passenger Side
Part Number: 22601062
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Stabilizer Link, Front
Part Number: 22710259
Product Specifications
- Other Name: Link Assembly-Front Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Link, Stabilizer Shaft
- Position: Front
- Replaces: 22645963, 22650740, 22657717, 22697276, 22638799, 22657718
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

Chevrolet Malibu Sway Bar Link

Our website offers an extensive catalog of genuine Chevrolet Malibu Sway Bar Link at unbeatable prices. Every OEM Chevrolet Malibu Sway Bar Link comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Malibu Sway Bar Link Parts Questions & Experts Answers

Stabilizer Link, Green Line
22670300
Q: How to replace the front sway bar link on Chevrolet Malibu?
A: You should start by lifting and supporting the vehicle to change the Sway Bar Link. The next step requires tire and wheel component removal. Remove all material debris from around the Sway Bar Link bolt threads before starting with replacement tasks. Use the appropriate wrench of the right size to grasp the sway bar bolt thus removing the sway bar nut. First remove the insulator and washer from the Sway Bar Link bolt and then detach the bolt with the insulator and washer. The installation process requires the removal of both insulators and also the spacer. During installation place the washer and insulator onto the Sway Bar Link bolt while verifying that the insulators fit correctly within the sway bar then the lower Control Arm. Install the insulators and spacer on the sway bar between the lower Control Arm while using the sway bar bolt to position them when installing. Fasten the Sway Bar Link bolt with its washer and insulator before installing the insulator together with its washer. Fasten the Sway Bar Link nut to enable a torque of 23 n.m (17 lb ft). After installing the tire and wheel assembly it is necessary to remove the support before lowering the vehicle.