OEM Chevrolet Malibu Throttle Cable

Chevrolet Malibu Throttle Cable Parts Questions & Experts Answers

• Throttle Cable
  22619740
  Q: How to Service and Repair the Throttle Cable on Chevrolet Malibu?

  A: Begin the throttle cable replacement process by first turning OFF the ignition then removing the left instrument panel sound insulator. First disconnect the throttle cable when removing it from the accelerator pedal through the bulkhead by squeezing the cable cover tangs and pushing the cable forward. Begin by removing the throttle cable shield when it exists before disconnecting the cable from its retaining clip then throttle body lever then throttle cable bracket. Observing how the cable routes through the vehicle during its removal is essential. The installation step requires use of the noted routing for new throttle cable placement and must avoid moving parts with flexible components unless they are securely mounted to prevent any potential interference. The installation process requires you to feed the snap retainer through the bulkhead before connecting the throttle cable to the slot of the accelerator pedal lever and placing the retainer. After routing the cable to both the throttle body lever and the throttle cable bracket you should implement it through the retaining clip. After checking the complete movement range of the throttle check the installation and free operation of the throttle while avoiding binding at the pedal and shield for the throttle cable if provided. The installation of the left instrument panel sound insulator should conclude the procedure.