Other Name: Motor Assembly-Blower; HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
Replaces: 10335283
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Other Name: Motor, Air Conditioner Evaporator Blower; Climate Control Module; Fan & Motor; Blower Motor Switch; Motor; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
Replaces: 22048631, 52466092, 52498876
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
Other Name: Motor Kit, Air Conditioner Evaporator Blower; HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
Replaces: 52487083
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Chevrolet Monte Carlo Blower Motor
Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Blower Motor at unbeatable prices. Every OEM Chevrolet Monte Carlo Blower Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Monte Carlo Blower Motor Parts Questions & Experts Answers
Q: How to replace the blower motor on Chevrolet Monte Carlo?
A: To start the Blower Motor replacement process you need to disconnect the negative battery terminal. You first need to uninstall the right side instrument panel insulator followed by disconnecting both the Blower Motor electrical connector and Cooling Hose. Unbolt the Blower Motor components then extract the Blower Motor from its place. Reattach the Blower Motor to its specified place and keep to the fastener notice as guided in the service precautions. Insert and bolt in place the Blower Motor sections with torque of 1.3 n.m (12 lb in). After reconnecting the Blower Motor Cooling Hose and electrical cable you must replace both the right side instrument panel insulator and reconnect the negative Battery Cable.