How to replace the rear disc brake backing plate on Chevrolet S10?

Before starting work on a rear disc Brake Backing Plate begin by releasing the brake if it is engaged and lift the vehicle with proper support. Discard the tire and wheel combination while following the brake caliper notice in service precautions. You must first take away the brake rotor then move on to the Axle Shaft and park brake shoe. Take off the backing plate from the axle housing flange after removing its nuts. Secure the backing plate onto the axle housing flange and put on the backing plate nuts. Tighten them with 134.5 nm (100 foot pound) torque. Put back the park brake shoe and Axle Shaft in their proper places before setting the park brake shoe to the correct position. Position the brake rotor and tire assembly on the vehicle before letting the vehicle down. Slowly press the Brake Pedal up to two-thirds of its range when the engine is off and let go slowly. Let the Brake Pedal rest next to the bottom position and then press it again multiple times to fully position the brake caliper pistons and pads. Before finishing set the park brake cable to its proper position.

OEM Chevrolet S10 Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Brake Backing Plates found

View related parts
Chevrolet S10 Splash Shield, Passenger Side Part Number: 459758
$43.27
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Front Brake Disc Splash Right-Hand; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1995 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Driver Side Part Number: 15704499
$46.40 MSRP: $96.03
You Save: $49.63 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Passenger Side Part Number: 15704500
$43.83 MSRP: $94.58
You Save: $50.75 (54%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Backing Plate, Rear Passenger Side Part Number: 18046187
$97.81 MSRP: $164.78
You Save: $66.97 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Passenger Side
- Replaces: 18046191, 18025493
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Passenger Side Part Number: 19211694
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor; Front Speed Sensor
- Position: Passenger Side
- Replaces: 15727018
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Driver Side Part Number: 19211693
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor; Front Speed Sensor
- Position: Driver Side
- Replaces: 15727017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Driver Side Part Number: 15725355
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor; Front Speed Sensor
- Position: Driver Side
- Replaces: 15717517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Driver Side Part Number: 459757
Product Specifications
- Other Name: Shield Assembly-Front Brake Disc Splash Left-Hand; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1995 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Passenger Side Part Number: 15725356
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor; Front Speed Sensor
- Position: Passenger Side
- Replaces: 15717516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Backing Plate, Rear Passenger Side Part Number: 88935986
Product Specifications
- Other Name: Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Passenger Side
- Replaces: 12376592
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Backing Plate, Rear Passenger Side Part Number: 18012022
Product Specifications
- Other Name: Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Backing Plate, Rear Driver Side Part Number: 18012021
Product Specifications
- Other Name: Plate, Rear Brake Backing (Left-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Backing Plate, Rear Driver Side Part Number: 18046186
Product Specifications
- Other Name: Plate, Rear Brake Backing (Left-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Driver Side
- Replaces: 18046190, 18025492
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Backing Plate, Rear Passenger Side Part Number: 18013525
Product Specifications
- Other Name: Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Backing Plate, Rear Driver Side Part Number: 18013524
Product Specifications
- Other Name: Plate, Rear Brake Backing (Left-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield Part Number: 15638248
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield Part Number: 15638247
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Passenger Side Part Number: 14047282
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Splash Shield, Driver Side Part Number: 14047281
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Brake Backing Plate

Want to cut long-term maintenance and repair costs? Choose OEM Brake Backing Plate. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Brake Backing Plate includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet S10 Brake Backing Plate is one of the vital pieces that improve the dependability and functionality of the Chevrolet S10, a lightweight pickup truck, which has gained a reputation for ruggedness after entering the market in 1981. Being part of the brake system, the Brake Backing Plate has the function of protecting the brakes from dirt and corrosion; without it the Chevrolet S10 may not reach the same level of efficiency and security on the roads. Admittedly, it fits numerous S10 models, and its principal function is to protect drum and disc brakes while promoting optimal performance due to brake dust. Being made of corrosion resistant materials the Chevrolet S10 Brake Backing Plate offers a longer time of service and gives the vehicle a neater look owing to absence of brake dust. Preferably, the S10 has both rounded and new 'split' designs where the minor part of the axle can be unbolted separately from the other half for simplified installation and repair without the necessity to disassemble the axle shaft. It is therefore for this reason that the Brake Backing Plate stands out in the auto market since it is uniquely designed to suit all the needs of the S10 owners. By providing flawless structure and organization to the Chevrolet S10 Brake Backing Plate, the car becomes safer, more efficient, and is a vehicle that should be depended on for years to come. On the whole, the Brake Backing Plate plays the crucial role of the wheel's braking system belongs to the Chevrolet S10, enhancing its credibility and characteristics of the vehicle.

Chevrolet S10 Brake Backing Plate Parts and Q&A

Splash Shield, Passenger Side
15704500
Q: How to replace the rear disc brake backing plate on Chevrolet S10?
A:
Before starting work on a rear disc Brake Backing Plate begin by releasing the brake if it is engaged and lift the vehicle with proper support. Discard the tire and wheel combination while following the brake caliper notice in service precautions. You must first take away the brake rotor then move on to the Axle Shaft and park brake shoe. Take off the backing plate from the axle housing flange after removing its nuts. Secure the backing plate onto the axle housing flange and put on the backing plate nuts. Tighten them with 134.5 nm (100 foot pound) torque. Put back the park brake shoe and Axle Shaft in their proper places before setting the park brake shoe to the correct position. Position the brake rotor and tire assembly on the vehicle before letting the vehicle down. Slowly press the Brake Pedal up to two-thirds of its range when the engine is off and let go slowly. Let the Brake Pedal rest next to the bottom position and then press it again multiple times to fully position the brake caliper pistons and pads. Before finishing set the park brake cable to its proper position.