Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15704500
Splash Shield, Passenger Side

1998-2005 GM

Customer Questions & Expert Answers (7)
GM 15704500 Splash Shield, Passenger Side
GM 15704500 Splash Shield, Passenger Side
GM 15704500 Splash Shield, Passenger Side
GM 15704500 Splash Shield, Passenger Side
  • Part Description
    Shield, Brake Flange Plate; Brake Dust Shield
  • Position
    Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$43.83 MSRP: $94.58
You Save: $50.75 (54%)
Ships in 1 Business Day
1
ADD TO CART

  • 15704500 Splash Shield, Passenger Side is Ref No. 12 in the diagram below

    1998 GMC Sonoma Splash Shield, Passenger Side Diagram for 15704500
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15704500

  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1998-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1998-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15704500 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15704500 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake backing plate on Chevrolet S10? Posted by Customer
    A:
    Begin by raising the vehicle to access the Brake Backing Plate replacement process after tire and wheel removal followed by removal of Brake Drum and shoes and Wheel Cylinder. After removing the backing plate bolts and Axle Shaft you can remove the backing plate. Start by installing the new backing plate before following bolt installation instructions to achieve proper assembly. Secure the backing plate with bolts tightened to 48 nm (35 ft. Lbs.)when reinstalling the Axle Shaft and Wheel Cylinder alongside the brake shoes and Brake Drum follow these installation steps. Set the tire and wheel back in place before lowering the vehicle while performing a brake system bleed.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear disc brake backing plate on GMC Sonoma? Posted by Customer
    A:
    Before starting work on a rear disc Brake Backing Plate begin by releasing the brake if it is engaged and lift the vehicle with proper support. Discard the tire and wheel combination while following the brake caliper notice in service precautions. You must first take away the brake rotor then move on to the Axle Shaft and park brake shoe. Take off the backing plate from the axle housing flange after removing its nuts. Secure the backing plate onto the axle housing flange and put on the backing plate nuts. Tighten them with 134.5 nm (100 foot pound) torque. Put back the park brake shoe and Axle Shaft in their proper places before setting the park brake shoe to the correct position. Position the brake rotor and tire assembly on the vehicle before letting the vehicle down. Slowly press the Brake Pedal up to two-thirds of its range when the engine is off and let go slowly. Let the Brake Pedal rest next to the bottom position and then press it again multiple times to fully position the brake caliper pistons and pads. Before finishing set the park brake cable to its proper position.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after reinstalling the rear brake components for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the brake caliper and bracket assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after removing the hub and bearing assembly for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the splash shield (15 Series) and the splash shield (25 Series).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after placing the backing plate for the 2000 GMC Jimmy? Posted by Customer
    A:
    Install the four bolts and washers, tightening them to 48 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step to replace the brake backing plate for the 2001 GMC Jimmy? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Splash Shield, Passenger Side 15704500 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15704500 Splash Shield, Passenger Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15704500 Splash Shield, Passenger Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15704500 maintains top performance when functioning as the Shield, Brake Flange Plate; Brake Dust Shield unit at its Passenger Side. The component 15704500 is constructed from durable material and its dimensions span 9.1 x 12.1 x 1.0 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15704500 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.