Make sure this part fits

GM 18046187
Backing Plate, Rear Passenger Side

1998-2003 GM

Customer Questions & Expert Answers (8)
GM 18046187 Backing Plate, Rear Passenger Side
  • Part Description
    Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield
  • Position
    Rear Passenger Side
  • Replaces
    18046191, 18025493
  • Manufacturer
    General Motors
Make sure this part fits
$97.81 MSRP: $164.78
You Save: $66.97 (41%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2002 Chevrolet AstroBase, LS, LT6 Cyl 4.3 L GAS
    1998-2003 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2002 GMC SafariSL, SLE, SLT, SLX6 Cyl 4.3 L GAS
    1998-2003 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18046187 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18046187 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake backing plate on Chevrolet Astro? Posted by Customer
    A:
    To replace the Brake Backing Plate, first, lift the vehicle and removed the tire and wheel assembly, as well as Brake Drum, brake shoes, wheel cylinder and Axle Shaft. Next, remove the backing plate bolts and the backing plate itself. For installation, first, put the new backing plate and make sure to comply with fastener notice in service precautions. Fasten the backing plate with bolts that have been tightened to 48 nm (35 ft. Lbs.) then reinstall Axle Shaft, wheel cylinder, brake shoes and Brake Drum. Lastly, you should reinstall the tire and wheel assembly, lower your vehicle, and then bleed your vehicle's braking system.ular.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake backing plate on GMC Safari? Posted by Customer
    A:
    To replace the Brake Backing Plate, lift the car, remove tire and wheel assembly, brake drum, brake shoes, wheel cylinder and Axle Shaft. Then, remove the backing plate bolts and take out the backing plate. For installing proceed by inserting the new backing plate and make sure you abide by the fastener notice under service precautions. Replace the backing plate with bolts torque to 48 nm (35 ft. Lbs.), then reinstall the Axle Shaft, wheel cylinder, brake shoes, and Brake Drum. Finally, re-assemble the tire and wheel and then lower the vehicle and bleed the brake system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you begin the installation of the new splash shield for the 2001 Chevrolet Astro? Posted by Customer
    A:
    Place the new splash shield in position, ensuring to adhere to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What components need to be reinstalled after securing the backing plate for the 2002 Chevrolet S10? Posted by Customer
    A:
    Reinstall the axle shaft, wheel cylinder, brake shoes, and brake drum.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step to service and repair the backing plate for the 2000 GMC Safari? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What needs to be removed to access the splash shield for the 2002 GMC Safari? Posted by Customer
    A:
    The two wheel hub and bearing mounting bolts that secure the splash shield to the spindle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the next step after removing the tire and wheel assembly for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the brake rotor, followed by the axle shaft, and then the park brake shoe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Backing Plate, Rear Passenger Side 18046187 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18046187 Backing Plate, Rear Passenger Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18046187 Backing Plate, Rear Passenger Side fits certain Chevrolet S10, Astro models, as well as GMC Sonoma, Safari models.
The original GM component designated by manufacturer part number 18046187 maintains top performance when functioning as the Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield unit at its Rear Passenger Side. The component 18046187 is constructed from durable material and its dimensions span 12.2 x 12.1 x 8.5 inches while weighing 4.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Plate, Brake Flange/Backing. The part 18046187 has available replacement options 18046191, 18025493. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.