Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount; Mount, Transmission Mounting
Replaces: 15750514, 15683966, 15022551
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
Other Name: Mount; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Side Mount; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Other Name: Mount Assembly-Engine; Engine Mount Torque Strut; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Position: Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1985-1993 Chevrolet S10 | Base, Durango, EL, Sport, Tahoe | 4 Cyl 2.5 L GAS
Other Name: Mount Assembly-Engine; Engine Mount Torque Strut; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Position: Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1985-1993 Chevrolet S10 | Base, Durango, EL, Sport, Tahoe | 4 Cyl 2.5 L GAS
Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Transmission Mount Bracket; Rear Mount; Mount; Mount, Transmission Mounting
Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Motor Mount Bracket
Position: Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1985-1993 Chevrolet S10 | Base, Durango, EL, Sport, Tahoe | 4 Cyl 2.5 L GAS
| Page 1 of 2 |Next >
1-20 of 25 Results
Chevrolet S10 Motor And Transmission Mount
Our website offers an extensive catalog of genuine Chevrolet S10 Motor And Transmission Mount at unbeatable prices. Every OEM Chevrolet S10 Motor And Transmission Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet S10 Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to replace the Motor and Transmission Mount on Chevrolet S10?
A: To change the mount of the transmission, firstly, lift the car and hold it properly. Use a transmission jack to hold up the transmission, then remove the nut or nuts holding the transmission mount to the transmission hole. Raise the transmission to take off the load from the mount, and then remove the bolts holding the mount to the transmission (2WD) or transfer case adapter (4WD). Lift the transmission a little for the transmission mounting disconnected and removed off the vehicle. For installation place the new transmission mount and install, the bolts that hold them into place with the transmission for 2wd and transfer case adapter for 4wd vehicles tightening bolts to 50 nm (37 ft. Lbs) for 2wd vehicles and, 47 nm 35 ft.-lbs 4wd vehicles. Lower the transmission then the nut nut securing the transmission mount to the transmission support and tighten the nuts to the 40 nm (30 ft. Lbs.). Finally, take out the transmission jack and lower down the vehicle.