Other Name: Seal, Propeller Shaft Front Slip Yoke Oil; Automatic Transmission Extension Housing Seal; Transmission Seal; Seal, Transmission Rear Main Bearing; Seal, Rear Bearing Retaining; Seal, Transmission Extension
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2006 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Seal, Rear Bearing Retaining; Manual Transmission Extension Housing Seal and Gasket Set.; Seal, Transmission Rear Main Bearing; Seal, Transmission Extension
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2006 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Seal, Transmission Extension; Manual Transmission Housing Seal; Gasket Set.; Seal, Transmission Main Shaft; Seal, Rear Bearing Retaining
Position: Rear
Replaces: 15635281
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2006 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Chevrolet Silverado 1500 Transfer Case Seal
Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Transfer Case Seal at unbeatable prices. Every OEM Chevrolet Silverado 1500 Transfer Case Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 1500 Transfer Case Seal Parts Questions & Experts Answers
Q: What tools are required to replace the rear transfer case seal on Chevrolet Silverado 1500?
A: Three tools are needed for the rear output shaft seal replacement task: j 37668-a (Seal Installer) j 45380 (Transfer Case Rear Bushing Remover and Installer Light Duty) and dt-48734 (Transfer Case Rear Bushing Remover and Installer Heavy Duty). The replacement process starts by taking off the transfer case shield but only if it exists before moving onto the rear propeller shaft and rear output shaft seal. Studies the rear output shaft bushing before choosing the correct tool which features j 45380 for light duty and dt-48734 for heavy duty applications. Set the finger structure of the selected tool in position in front of the bushing. Secure the tube and forcing screw onto the finger structure while keeping the forcing screw rotated backward. A wrench on the forcing screw allows the removal of the rear output shaft bushing. The installation process requires a fresh rear output shaft bushing that you must insert through the same tool which positions the drain hole of the boot toward the downward direction. First position the rear output shaft bushing with the selected tool while hitting it with a hammer before installing the rear output shaft seal with j 37668-a. Finish the installation by replacing the rear propeller shaft followed by fluid level verification and fluid addition when needed and transfer case shield installation (when present).