How to service and repair the Valve Stem Oil Seal on Chevrolet Silverado 1500?

To work on the Valve Stem Oil Seal you must first take out all required valve rocker arms plus spark plugs. Thread in the j 22794 adapter at the Spark Plug port and link a shop air supply through a hose to hold the valves steady. Respace the flat washer on your bolt before reinserting the bolt and Rocker Arm onto the valve spring you need to remove. Take care during valve spring handling since these parts have strong tension which puts you at danger of physical harm. Push the j 5892-d (Valve Spring Compressor) under the Rocker Arm washer slot before pressing it steady so you can reach the valve keys with your tool. You can substitute the j 38606 (Valve Spring Compressor) when needed. Unplug the valve keys and gently let go the valve spring grip through the j 5892-d or j 38606's handle. First move past the valve spring cap and valve spring. Then take out the Valve Stem Oil Seal. Put the valve in its designated guide and apply engine oil to both valve guide and valve stem before installing the Valve Stem Oil Seal with the j 42073 gear. Push the seal down the valve guide until the j 42073 stops at the valve spring seat yet leaves 1-2mm space between seal and guide. Place the valve spring on top and set the valve spring cap. Use j 5892-d to compress the spring gently until the valve keys become reachable for assembly. When valve clearance is insufficient stay with the j 38606 tool design. Insert the valve stem o-ring seal over its space while positioning the valve stem keys into place using grease as a holder. Let go of the valve springs gently to make sure the keys stay fitted properly within the valve spring cap to avoid power unit destruction. Test if valve stem keys fit correctly and gently tap stem using a plastic hammer if needed while removing j 5892-d or j 38606 equipment. Put back the spark plugs and valve rocker arms after taking out the j 22794 component.

OEM Chevrolet Silverado 1500 Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Valve Stem Oil Seals found

View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12564852
$12.60 MSRP: $15.03
You Save: $2.43 (17%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 12558674
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2013 Chevrolet Silverado 1500 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12689007
$5.30 MSRP: $8.30
You Save: $3.00 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 12645473
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12689006
$4.60 MSRP: $7.58
You Save: $2.98 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 12645472
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12533586
$23.37 MSRP: $36.61
You Save: $13.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chevrolet Silverado 1500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12482063
$36.33 MSRP: $61.86
You Save: $25.53 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2013 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12482062
$39.85 MSRP: $67.83
You Save: $27.98 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal; Valve Spring; Valve Springs
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2013 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12457652
$20.81 MSRP: $32.59
You Save: $11.78 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Replaces: 12560189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet Silverado 1500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 10212810
$4.98 MSRP: $7.81
You Save: $2.83 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Valve Seal Kit
- Replaces: 00460483, 460483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2013 Chevrolet Silverado 1500 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 55484799
$2.69 MSRP: $4.23
You Save: $1.54 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chevrolet Silverado 1500 | Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST | 6 Cyl 3.0 L DIESEL
View related parts
Chevrolet Silverado 1500 Valve Seals
Part Number: 12693552
$20.45 MSRP: $36.52
You Save: $16.07 (44%)
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, LT, LT Trail Boss, RST, WT | 4 Cyl 2.7 L GAS

Chevrolet Silverado 1500 Valve Stem Oil Seal

Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Valve Stem Oil Seal at unbeatable prices. Every OEM Chevrolet Silverado 1500 Valve Stem Oil Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 1500 Valve Stem Oil Seal Parts Questions & Experts Answers

Valve Seals
12482062
Q: How to service and repair the Valve Stem Oil Seal on Chevrolet Silverado 1500?
A: To work on the Valve Stem Oil Seal you must first take out all required valve Rocker Arms plus Spark Plugs. Thread in the j 22794 adapter at the Spark Plug port and link a shop air supply through a hose to hold the valves steady. Respace the flat washer on your bolt before reinserting the bolt and Rocker Arm onto the valve spring you need to remove. Take care during valve spring handling since these parts have strong tension which puts you at danger of physical harm. Push the j 5892-d (Valve Spring Compressor) under the Rocker Arm washer slot before pressing it steady so you can reach the valve keys with your tool. You can substitute the j 38606 (Valve Spring Compressor) when needed. Unplug the valve keys and gently let go the valve spring grip through the j 5892-d or j 38606's handle. First move past the valve spring cap and valve spring. Then take out the Valve Stem Oil Seal. Put the valve in its designated guide and apply engine oil to both valve guide and valve stem before installing the Valve Stem Oil Seal with the j 42073 gear. Push the seal down the valve guide until the j 42073 stops at the valve spring seat yet leaves 1-2mm space between seal and guide. Place the valve spring on top and set the valve spring cap. Use j 5892-d to compress the spring gently until the valve keys become reachable for assembly. When valve clearance is insufficient stay with the j 38606 tool design. Insert the valve stem o-ring seal over its space while positioning the valve stem keys into place using grease as a holder. Let go of the valve springs gently to make sure the keys stay fitted properly within the valve spring cap to avoid power unit destruction. Test if valve stem keys fit correctly and gently tap stem using a plastic hammer if needed while removing j 5892-d or j 38606 equipment. Put back the spark plugs and valve rocker arms after taking out the j 22794 component.