Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004 Chevrolet Silverado 1500 | Base, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Chevrolet Silverado 1500 Wiper Motor
Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Wiper Motor at unbeatable prices. Every OEM Chevrolet Silverado 1500 Wiper Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 1500 Wiper Motor Parts Questions & Experts Answers
Q: How to replace the wiper motor on Chevrolet Silverado 1500?
A: You need two tools to replace the wiper motor: Wiper Transmission Separator (J 39232) and Wiper Transmission Installer (J 39529). First remove all wiper connectors and the air inlet panel. After that take the four bolts out of the reinforcement panel. Remove the wiper transmission assembly by taking off its electrical connector and unscrewing its two bolts. Grab the Wiper Transmission Separator (J 39232) to disconnect the drive link from the wiper motor crank arm. Afterwards remove the wiper motor's two bolts and take out the motor from the wiper transmission. Put the wiper motor on top of the wiper transmission assembly and fasten it firmly using two bolts at 8 Nm (71 lb in). Now put the drive link onto the wiper motor crank arm through the Wiper Transmission Installer (J 39529) and fit the wiper transmission assembly to the vehicle with both bolts at 9 N.m (80 lb in). Reestablish power to the wiper motor and put back the reinforcement panel using four bolts at 9 N.m (80 lb in) resistance. Also place back the air inlet grille and wipers. Press the wipers to check if they move smoothly.