What tools are required to replace the drive pinion bearings on a 9.75 Inch Axle on Chevrolet Silverado 2500?

To replace the drive pinion bearings on a 9.75 inch axle, the following tools are required: j 22536 pinion driver (J 22536), j 22912-01 split-plate bearing puller (J 22912-01), j 42176 universal driver handle - non-threaded (J 42176), j 45703 Pinion Bearing race remover - dana 248 (J 45703), j 45704 Pinion Bearing race installer - dana 248 (J 45704), j 45705 Pinion Bearing race remover - dana 248/267 (J 45705), j 7818 inner bearing race installer (J 7818), and j 8092 universal drive handle - ¾ in - 10 (J 8092). Proceed with raising the vehicle initially then remove both the Differential assembly and the pinion yoke along with the pinion oil seal. Insert the j 22536 by seating it properly onto the pinion before proceeding. Drive out the pinion using the j 22536 tool along with a hammer without letting the pinion escape from the rear axle housing. The technicians must use j 45703 and j 42176 to remove pinion preload shims and inner Pinion Bearing cup and oil deflector. Use the j 45705 and j 42176 to remove the outer Pinion Bearing cup followed by the removal of the inner Pinion Bearing with j 22912-01 and a hydraulic press then the pinion position shim. The first step for installation involves placing the oil deflector in the inner pinion cup bore before installing the inner Pinion Bearing cup with j 45704 and j 8092 tools followed by outer Pinion Bearing cup installation with j 7818 and j 8092 tools. Determine the required thicknesses of the pinion position shim and preload shim for the drive pinion before reinstalling the Differential assembly and filling the axle with proper lubricant before lowering the vehicle.

OEM Chevrolet Silverado 2500 Pinion Bearing

Transmission Pinion Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Pinion Bearings found

View related parts
Chevrolet Silverado 2500 Wheel Bearing
Part Number: 9436881
$81.40 MSRP: $145.36
You Save: $63.96 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings
Part Number: 9413427
$61.47 MSRP: $109.76
You Save: $48.29 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearings; Differential Drive, Steering Knuckle King, Pinion Shaft, Front Axle Bearings.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Side Bearings
Part Number: 88943839
$48.83 MSRP: $144.56
You Save: $95.73 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Replaces: 26091723
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings, Inner
Part Number: 457108
$55.00 MSRP: $154.36
You Save: $99.36 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Inner Pinion Bearing; Differential Drive Pinion Bearings.
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings
Part Number: 454021
$163.06 MSRP: $292.48
You Save: $129.42 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear; Differential Pinion Bearing; Rear Pinion Bearing; Inner Pinion Bearing; Differential Drive Pinion; Rear Wheel Bearing.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Side Bearings
Part Number: 25824250
$72.20 MSRP: $140.14
You Save: $67.94 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing
- Replaces: 09418390, 9418390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings
Part Number: 23243839
$71.22 MSRP: $139.44
You Save: $68.22 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Pinion; Differential Pinion Bearing; Rear Pinion Bearing; Front/Inner/Outer Pinion; Diff/Drive Axle; Pinion/Clutch/Rear Wheel
- Position: Front
- Replaces: 09418357, 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Side Bearings
Part Number: 11505123
$56.18 MSRP: $166.26
You Save: $110.08 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing; Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings
Part Number: 9417781
$43.00 MSRP: $103.28
You Save: $60.28 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearing; Differential Drive Pinion Front, Drive Pinion, Pinion Shaft Front, Front Axle
- Position: Front Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings
Part Number: 9414917
$70.11 MSRP: $133.08
You Save: $62.97 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Differential Bearing; Rear Pinion Bearing; Drive Pinion Rear; Axle Pinion Shaft; Ring And Pinion; Pinion Shaft Front.
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings
Part Number: 9413168
$93.86 MSRP: $167.61
You Save: $73.75 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Roller; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Drive Pinion Bearing Assembly.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Pinion Bearings, Outer
Part Number: 15534483
$53.12 MSRP: $94.85
You Save: $41.73 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Front Pinion Bearing; Bearing, Differential Pinion; Bearing, Pinion Shaft Front
- Position: Outer
- Replaces: 09440836, 9440836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS

Chevrolet Silverado 2500 Pinion Bearing

Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Pinion Bearing at unbeatable prices. Every OEM Chevrolet Silverado 2500 Pinion Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 2500 Pinion Bearing Parts Questions & Experts Answers

Pinion Bearings, Inner
457108
Q: What tools are required to replace the drive pinion bearings on a 9.75 Inch Axle on Chevrolet Silverado 2500?
A: To replace the drive pinion bearings on a 9.75 inch axle, the following tools are required: j 22536 pinion driver (J 22536), j 22912-01 split-plate bearing puller (J 22912-01), j 42176 universal driver handle - non-threaded (J 42176), j 45703 Pinion Bearing race remover - dana 248 (J 45703), j 45704 Pinion Bearing race installer - dana 248 (J 45704), j 45705 Pinion Bearing race remover - dana 248/267 (J 45705), j 7818 inner bearing race installer (J 7818), and j 8092 universal drive handle - ¾ in - 10 (J 8092). Proceed with raising the vehicle initially then remove both the Differential assembly and the pinion yoke along with the pinion oil seal. Insert the j 22536 by seating it properly onto the pinion before proceeding. Drive out the pinion using the j 22536 tool along with a hammer without letting the pinion escape from the rear axle housing. The technicians must use j 45703 and j 42176 to remove pinion preload shims and inner Pinion Bearing cup and oil deflector. Use the j 45705 and j 42176 to remove the outer Pinion Bearing cup followed by the removal of the inner Pinion Bearing with j 22912-01 and a hydraulic press then the pinion position shim. The first step for installation involves placing the oil deflector in the inner pinion cup bore before installing the inner Pinion Bearing cup with j 45704 and j 8092 tools followed by outer Pinion Bearing cup installation with j 7818 and j 8092 tools. Determine the required thicknesses of the pinion position shim and preload shim for the drive pinion before reinstalling the Differential assembly and filling the axle with proper lubricant before lowering the vehicle.

Related Chevrolet Silverado 2500 Parts

Browse Chevrolet Silverado 2500 Pinion Bearing by Years

2004 2003 2002 2001 2000 1999