Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 9414917
Pinion Bearings

1996-2019 GM

Customer Questions & Expert Answers (27)
GM 9414917 Pinion Bearings
  • Part Description
    Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Differential Bearing
  • Position
    Inner
  • Manufacturer
    General Motors
Make sure this part fits
$70.11 MSRP: $133.08
You Save: $62.97 (48%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 9414917 Pinion Bearings is Ref No. 12 in the diagram below

    2021 GMC Savana 3500 Pinion Bearings Diagram for 9414917
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9414917

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1996-2002 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-2002 Chevrolet Express 3500Base, LS8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    2003-2010 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 9414917 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 9414917 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the bearing for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Remove the shim and the outer and inner pinion bearing cups from the axle housing using a hammer and brass drift.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What tools are needed to replace the drive pinion bearings on 8.6 and 9.5 inch axles for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    The necessary tools are J 7818, J 8092, J 8611-01, J 8614-01, J 22306, J 22912-01, J 24433, J 36614, J 45870, and J 45871.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    How do you remove the pinion for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the J 22536 Pinion Driver, ensuring it is firmly seated on the pinion, and drive the pinion out using the J 22536 and a hammer, taking care not to let the pinion fall out of the rear axle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What should be done after installing the pinion bearing cups for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Press the inner pinion bearing using the Pinion Cone and Side Bearing Installer (J 24433), install a new collapsible spacer, lubricate the pinion bearings, and place the outer pinion bearing into the retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    How do you remove the differential side bearing for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Install the J45711 and the J36597, then use the J45711 and a hydraulic press to remove the bearing, ensuring to mark the inboard shims as left or right.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Differential Bearing
    Q:
    What are the final steps after installing the differential side bearing for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reinstall the differential assembly, fill the axle with the proper lubricant, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Differential Bearing
    Q:
    How do you install the new pinion oil seal for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Install a new pinion oil seal with the Rear Axle Pinion Oil Seal Installer (J 44414).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What steps follow the installation of the pinion bearing cups for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Press the inner pinion bearing onto the pinion with the Pinion Cone and Side Bearing Installer (J24433), install a new collapsible spacer, lubricate the pinion bearings, and place the outer pinion bearing into the retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What should be done after removing the Flange and Pulley Holding Tool for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the original shim or a 0.41 mm shim if the original is unavailable, and secure the pinion gear bearing retainer to the axle housing with bolts tightened to 88 Nm (65 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    How do you install the inner pinion bearing cup for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Use the J 37624 and J 8092.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    How do you install the pinion into the axle housing for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the pinion into the axle housing, apply sealant to the splines of the pinion yoke, and install the pinion yoke, aligning the marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What tools are required to replace the drive pinion bearings on a 9.75-inch axle for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    The required tools are: Pinion Driver (J22536), Split-Plate Bearing Puller (J22912-01), Universal Driver Handle - Non-Threaded (J42176), Pinion Bearing Race Remover - Dana 248 (J45703), Pinion Bearing Race Installer - Dana 248 (J45704), Pinion Bearing Race Remover - Dana 248/267 (J45705), Inner Bearing Race Installer (J7818), and Universal Drive Handle - 3/4 inch - 10 (J8092).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What should be done after placing a new collapsible spacer for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Lubricate the pinion bearings with axle lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What should be removed after the pinion for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the pinion preload shims, the inner pinion bearing cup, and the oil deflector using the J 45703 and J 42176.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What should be done after pressing the bearing on the pinion shim for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Use the J 22828 (Input Shaft Gear Installer) or the J 36614 (Inner Pinion Bearing Installer) to install the inner pinion bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    How do you tighten the pinion nut for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Use the J 8614-01 to hold the pinion yoke while tightening the pinion nut until the pinion end play is just taken up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What are the final steps after measuring the rotating torque for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the differential assembly, adjust the differential side bearing preload, determine the selective shim thickness for the drive pinion, adjust the backlash, fill the axle with lubricant, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What should be done after removing the differential side bearings for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    After removal, take the differential assembly out of the vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Differential Bearing
    Q:
    What is the first step in the replacement process for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Raise the vehicle and remove the differential assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What is the procedure for tightening the pinion nut for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the yoke and tighten the pinion nut while holding the Flange and Pulley Holding Tool (J 8614-01) until the pinion end play is just taken up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What tools are required to replace the drive pinion bearings on a 10.5-inch axle for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    The required tools are J 22761 (Differential Side Bearing Installer), J 8614-01 (Flange and Pulley Holding Tool), J 37624 (Pinion Bearing Installer), J 24433 (Pinion Cone and Side Bearing Installer), J 22912-B (Split Plate Bearing Puller), J 44414 (Rear Axle Pinion Oil Seal Installer), J 8608 (Rear Pinion Bearing Installer), and J 8092 (Universal Driver Handle - 3/4 in - 10).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    How do you install the new pinion oil seal for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Use the J 22388 for 8.6 inch and 9.5 inch axles or J 44414 for 11.5 inch axle, then install the pinion into the axle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What is the procedure for inserting the pinion into the axle housing for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Apply sealant to the splines of the pinion yoke, install the pinion yoke, and align it with the marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What is the next step after installing the inner pinion bearing cup for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Determine the selective shim thickness for the pinion and install it between the inner pinion bearing and the shoulder on the gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What tools are used for the installation of the pinion bearing cups for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Use the J 8611-01 or J 7818 for the outer pinion bearing cup and the J 45870 or J 22306 for the inner pinion bearing cup, along with the J 8092.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    Q:
    What is the installation process for the new components for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Place the oil deflector into the inner pinion cup bore, then install the inner pinion bearing cup with the J 45704 and J 8092, followed by the outer pinion bearing cup using the J 7818 and J 8092.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pinion Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pinion Bearings 9414917 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9414917 Pinion Bearings is available in the market under the name GM Pinion Bearing, Differential Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9414917 Pinion Bearings fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 9414917 maintains top performance when functioning as the Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Differential Bearing unit at its Inner. The component 9414917 is constructed from durable material and its dimensions span 4.4 x 5.1 x 2.4 inches while weighing 2.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Pinion Bearing; Drive Pinion Rear; Axle Pinion Shaft; Ring And Pinion; Pinion Shaft Front.. The part 9414917 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.