What tools are required to replace the drive pinion bearings on a 9.75-inch axle on Chevrolet Suburban 1500?

The tools necessary for drive Pinion Bearing replacement on a 9.75-inch axle comprise pinion driver (J22536), split-plate bearing puller (J22912-01), universal driver handle - non-threaded (J42176), Pinion Bearing race remover - dana 248 (J45703), Pinion Bearing race installer - dana 248 (J45704), Pinion Bearing race remover - dana 248/267 (J45705) and inner bearing race installer (J7818) as well as universal drive handle - 3/4 inch - 10 (J8092). First lift the vehicle then remove the Differential assembly together with the pinion yoke and pinion oil seal before proceeding to uninstall the thrust washer. Place the pinion driver (J22536) onto the pinion until it creates a solid connection before using it together with the same tool and hammer to drive the pinion safely from the rear axle housing. The Pinion Bearing race remover - dana 248 (J45703) and universal driver handle - non-threaded (J42176) tools remove both the pinion preload shims and the inner Pinion Bearing cup and oil deflector. The outer Pinion Bearing cup then is taken out with the Pinion Bearing race remover - dana 248/267 (J45705) and universal driver handle - non-threaded (J42176). The split-plate bearing puller (J22912-01) with a hydraulic press enables removal of the inner Pinion Bearing while the pinion position shim should be extracted next. Place the oil deflector inside the inner pinion cup bore before installing its bearing cup with the Pinion Bearing race installer - dana 248 (J45704) and universal drive handle - 3/4 inch - 10 (J8092). The procees continues with the outer Pinion Bearing cup installation through the inner bearing race installer (J7818) and universal drive handle - 3/4 inch - 10 (J8092). Measure the shims for the pinion position and the drive pinion preload before reinstalling the Differential while adding proper lubricant to the axle of the vehicle.

OEM Chevrolet Suburban 1500 Pinion Bearing

Transmission Pinion Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Pinion Bearings found

View related parts
Chevrolet Suburban 1500 Output Shaft Bearing
Part Number: 12334861
$31.10 MSRP: $51.22
You Save: $20.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Axle Bearing; Bearing, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Suburban 1500 | LT, LTZ | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Wheel Bearing
Part Number: 9436881
$76.25 MSRP: $145.36
You Save: $69.11 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009, 2000-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings
Part Number: 9413427
$56.84 MSRP: $109.76
You Save: $52.92 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearings; Differential Drive, Steering Knuckle King, Pinion Shaft, Front Axle Bearings.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Side Bearings
Part Number: 88943839
$48.83 MSRP: $144.56
You Save: $95.73 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Replaces: 26091723
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Suburban 1500 | LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings, Inner
Part Number: 457108
$55.00 MSRP: $154.36
You Save: $99.36 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Inner Pinion Bearing; Differential Drive Pinion Bearings.
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings
Part Number: 454021
$161.60 MSRP: $292.48
You Save: $130.88 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear; Differential Pinion Bearing; Rear Pinion Bearing; Inner Pinion Bearing; Differential Drive Pinion; Rear Wheel Bearing.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Seal, Outer
Part Number: 25824252
$50.72 MSRP: $95.24
You Save: $44.52 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Pinion Bearings; Side Bearings; Bearing; Bearing, Pinion Shaft Front
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Suburban 1500 | LT, LTZ | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings, Inner
Part Number: 25824251
$59.57 MSRP: $176.34
You Save: $116.77 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Side Bearings; Bearing, Drive Pinion Rear And Intermediate
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Suburban 1500 | LT, LTZ | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Side Bearings
Part Number: 25824250
$72.20 MSRP: $140.14
You Save: $67.94 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing
- Replaces: 09418390, 9418390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings
Part Number: 23243839
$71.22 MSRP: $139.44
You Save: $68.22 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Pinion; Differential Pinion Bearing; Rear Pinion Bearing; Front/Inner/Outer Pinion; Diff/Drive Axle; Pinion/Clutch/Rear Wheel
- Position: Front
- Replaces: 09418357, 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Side Bearings
Part Number: 11505123
$56.18 MSRP: $166.26
You Save: $110.08 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing; Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings
Part Number: 9417781
$43.00 MSRP: $103.28
You Save: $60.28 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearing; Differential Drive Pinion Front, Drive Pinion, Pinion Shaft Front, Front Axle
- Position: Front Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings
Part Number: 9414917
$70.11 MSRP: $133.08
You Save: $62.97 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Differential Bearing; Rear Pinion Bearing; Drive Pinion Rear; Axle Pinion Shaft; Ring And Pinion; Pinion Shaft Front.
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009, 2003-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings
Part Number: 9413168
$93.86 MSRP: $167.61
You Save: $73.75 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Roller; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Drive Pinion Bearing Assembly.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Suburban 1500 | LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Suburban 1500 Pinion Bearings, Outer
Part Number: 15534483
$53.12 MSRP: $94.85
You Save: $41.73 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Front Pinion Bearing; Bearing, Differential Pinion; Bearing, Pinion Shaft Front
- Position: Outer
- Replaces: 09440836, 9440836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Suburban 1500 | LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Suburban 1500 Pinion Bearing

Our website offers an extensive catalog of genuine Chevrolet Suburban 1500 Pinion Bearing at unbeatable prices. Every OEM Chevrolet Suburban 1500 Pinion Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Suburban 1500 Pinion Bearing Parts Questions & Experts Answers

Pinion Bearings, Inner
457108
Q: What tools are required to replace the drive pinion bearings on a 9.75-inch axle on Chevrolet Suburban 1500?
A: The tools necessary for drive Pinion Bearing replacement on a 9.75-inch axle comprise pinion driver (J22536), split-plate bearing puller (J22912-01), universal driver handle - non-threaded (J42176), Pinion Bearing race remover - dana 248 (J45703), Pinion Bearing race installer - dana 248 (J45704), Pinion Bearing race remover - dana 248/267 (J45705) and inner bearing race installer (J7818) as well as universal drive handle - 3/4 inch - 10 (J8092). First lift the vehicle then remove the Differential assembly together with the pinion yoke and pinion oil seal before proceeding to uninstall the thrust washer. Place the pinion driver (J22536) onto the pinion until it creates a solid connection before using it together with the same tool and hammer to drive the pinion safely from the rear axle housing. The Pinion Bearing race remover - dana 248 (J45703) and universal driver handle - non-threaded (J42176) tools remove both the pinion preload shims and the inner Pinion Bearing cup and oil deflector. The outer Pinion Bearing cup then is taken out with the Pinion Bearing race remover - dana 248/267 (J45705) and universal driver handle - non-threaded (J42176). The split-plate bearing puller (J22912-01) with a hydraulic press enables removal of the inner Pinion Bearing while the pinion position shim should be extracted next. Place the oil deflector inside the inner pinion cup bore before installing its bearing cup with the Pinion Bearing race installer - dana 248 (J45704) and universal drive handle - 3/4 inch - 10 (J8092). The procees continues with the outer Pinion Bearing cup installation through the inner bearing race installer (J7818) and universal drive handle - 3/4 inch - 10 (J8092). Measure the shims for the pinion position and the drive pinion preload before reinstalling the Differential while adding proper lubricant to the axle of the vehicle.

Related Chevrolet Suburban 1500 Parts

Browse Chevrolet Suburban 1500 Pinion Bearing by Years

2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000