How to replace the inner rear axle wheel seal on Chevrolet Suburban 1500?

You need to raise your vehicle before removing the wheel and tire and then the Differential assembly. The replacement process requires using a small expanding driver and driving washer from the expander assembly system after correctly aligning separation lines. The driver bar extension should be equipped with the expander assembly before the driver bar attachment. The camshaft bearing service set (J 33049) should be inserted through the Axle Shaft seal along with the axle tube. Utilize the hand to hold the expander assembly nut as the driving bar is rotated clockwise until it tightens against the seal. Affectively drive out the seal using the camshaft bearing service set (J 33049) operated by a hammer. To install the drive bar extension connect it to the drive bar of the camshaft bearing service set (J 33049) before inserting it into the opposite side Axle Shaft tube. Use the Differential seal installer - inner (J 45177) attached to the camshaft bearing service set (J 33049) to insert the Axle Shaft seal into its fitting in the axle tube. Drive the Axle Shaft seal into the axle tube with the combination of Differential seal installer - inner (J 45177), camshaft bearing service set (J 33049) and a hammer. The last step includes reinstallation of the Differential assembly combined with axle shafts and tire and wheel assembly as well as lowering the vehicle.

OEM Chevrolet Suburban 1500 Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Seals found

View related parts
Chevrolet Suburban 1500 Output Shaft Seal, Front Inner
Part Number: 22761722
$21.98 MSRP: $37.76
You Save: $15.78 (42%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Front Drive Axle Inner Shaft; Axle Seal; Inner Seal; Outer Seal; Seal, Front Axle
- Position: Front Inner
- Replaces: 12471591, 12471682, 15801507, 12479012, 26059623
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Output Shaft Seal, Front
Part Number: 19169124
$11.50 MSRP: $18.04
You Save: $6.54 (37%)
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Shaft; Axle Seal; Seal, Front Axle
- Position: Front
- Replaces: 12471683, 12471592, 12479155, 26059624
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009, 2001-2005 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Oil Seal, Rear
Part Number: 19180849
$15.56 MSRP: $29.22
You Save: $13.66 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Bearing Seal; Axle Seals; Wheel Bearing Oil Seal; Rear Axle Shaft Seal.
- Position: Rear
- Replaces: 15522062, 14047298, 26057167
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Axle Seal, Rear
Part Number: 15823962
$29.22 MSRP: $54.88
You Save: $25.66 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Hub Seal; Axle Seals; Hub Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15007008, 26061024
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009, 2000-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Oil Seal, Rear
Part Number: 12471686
$12.28 MSRP: $22.22
You Save: $9.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Hub Seal; Bearing Seal; Axle Seals; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15522060, 26037309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2014 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Suburban 1500 Wheel Seal

Our website offers an extensive catalog of genuine Chevrolet Suburban 1500 Wheel Seal at unbeatable prices. Every OEM Chevrolet Suburban 1500 Wheel Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Suburban 1500 Wheel Seal Parts Questions & Experts Answers

Axle Seal, Rear
15823962
Q: How to replace the inner rear axle wheel seal on Chevrolet Suburban 1500?
A: You need to raise your vehicle before removing the wheel and tire and then the Differential assembly. The replacement process requires using a small expanding driver and driving washer from the expander assembly system after correctly aligning separation lines. The driver bar extension should be equipped with the expander assembly before the driver bar attachment. The camshaft bearing service set (J 33049) should be inserted through the Axle Shaft seal along with the axle tube. Utilize the hand to hold the expander assembly nut as the driving bar is rotated clockwise until it tightens against the seal. Affectively drive out the seal using the camshaft bearing service set (J 33049) operated by a hammer. To install the drive bar extension connect it to the drive bar of the camshaft bearing service set (J 33049) before inserting it into the opposite side Axle Shaft tube. Use the Differential seal installer - inner (J 45177) attached to the camshaft bearing service set (J 33049) to insert the Axle Shaft seal into its fitting in the axle tube. Drive the Axle Shaft seal into the axle tube with the combination of Differential seal installer - inner (J 45177), camshaft bearing service set (J 33049) and a hammer. The last step includes reinstallation of the Differential assembly combined with axle shafts and tire and wheel assembly as well as lowering the vehicle.