OEM Chevrolet SSR Fuel Pressure Regulator

Chevrolet SSR Fuel Pressure Regulator Parts Questions & Experts Answers

• Fuel Pressure Regulator
  19245530
  Q: How to replace the fuel pressure regulator on Chevrolet SSR?

  A: The replacement of the Fuel Pressure Regulator should begin with removing the engine sight shield then draining pressure from the fuel system. Start by disconnecting the vacuum line connected to the Fuel Pressure Regulator and wipe any accumulated dirt from the regulator retainer together with its surrounding surface. After disconnecting the Fuel Pressure Regulator retainer, carefully take out the Fuel Pressure Regulator from its housing. The back up ring should be placed first followed by new large o-ring and regulator filter before setting the Fuel Pressure Regulator into position. Both new small o-rings require cleaning with engine oil before installation on the Fuel Pressure Regulator. To install the pressure regulator into its housing insert it into the Fuel Rail while you fasten a new fuel regulator retainer. The procedure ends with connecting the Fuel Pressure Regulator vacuum line together with the negative Battery Cable along with securing the fuel filler cap. Examine for leakages by activating the ignition for 2 seconds before switching it off for 10 seconds followed by a restart to detect fuel leaks. Replace the engine sight shield as the final step of the process.