How to replace the rear disc brake backing plate on the 25/35 Series and 2500 Series on Chevrolet Suburban 1500?

Question

Accepted Answer

Secondly as part of replacing the rear disc Brake Backing Plate for the 25/35 series and the 2500 series, release the park brake, and lift up and support vehicle. Take off the tire and wheel assembly, and then remove the tension in the park brake cables by loosening the nut on the equalizer face. Pull off the rear cable of the park brakes from the lever of the park brake actuator and disengage it from the bracket that holds the mounting bracket by the use of locking tabs. In its turn, detai, axle shaft, and park brake shoe, and backing plate on the next toti, nuts from the backing plate to remove the backing plate to the axle house i came. For the installation, you need to attach backing plate to the axel housing flange and tighten the backing plate with nuts to 135 nm (100 ft. Lbs.). Reinstall the park brake shoe and Axle Shaft, adjusting it. Mount the rotor and reconnect the park brake cable to the bracket and ensure the locking tabs lock in place. Reattach the rear park brake cable to the park brake actuator lever and tighten the nut to the equalizer to 3.5 nm (31 inch lbs). Lastly, secure the tire and wheel assembly back, remove the safety stands, lower the vehicle and adjust the park brake cable.

OEM Chevrolet Suburban 1500 Brake Backing Plate

4 Brake Backing Plates found

Chevrolet Suburban 1500 Backing Plate, Rear

Chevrolet Suburban 1500 Splash Shield

Chevrolet Suburban 1500 Backing Plate, Front Passenger Side

Chevrolet Suburban 1500 Backing Plate, Front Driver Side

Chevrolet Suburban 1500 Brake Backing Plate

Chevrolet Suburban 1500 Brake Backing Plate Parts Questions & Experts Answers

Related Chevrolet Suburban 1500 Parts

Browse Chevrolet Suburban 1500 Brake Backing Plate by Years