How to replace the exhaust pipe on 6.01 and 8.1 engines on Chevrolet Suburban 2500?

The replacement of exhaust manifold pipes on engines 6.01 and 8.1 begins with proper support of the vehicle during the work. After you remove the skid plate bolts of the oil pan and the plate itself, you should use a transmission jack to support the transmission. After removing the transmission mount to transmission support nuts, we should raise the transmission off its support component. Disassemble the bolts that hold the transmission support crossmember as well as the complete crossmember removal. First, remove any necessity of exhaust Muffler, then detach the engine harness clip with the Oxygen Sensor pigtail followed by disconnecting the connector position assurance (CPA) retainer and Oxygen Sensor electrical connector. The maintenance process requires Oxygen Sensor removal together with exhaust manifold pipe nuts and the pipe itself until the hanger slides from its bracket and disposal of the exhaust manifold pipe seal. Installation requires users to first position a fresh exhaust manifold pipe seal onto the exhaust manifold pipe followed by fitting the pipe while adding lubricant to the Exhaust Pipe hanger bracket for aid in installation. After placing the exhaust manifold pipe hanger within the bracket, you should install the exhaust manifold pipe nuts before torquing them to 50 nm (39 ft. lbs.). The replacement exhaust manifold pipe requires anti-seize compound GM P/N 12377953 or equivalent, which should be applied to threads of the old Oxygen Sensor before installing with a torque of 42 nm (31 ft. lbs.). The procedure for uninstalled pipes involves connecting the Oxygen Sensor electrical connector while also installing the CPA retainer and applying the clip over the engine harness and Oxygen Sensor pigtail. After installing the exhaust Muffler, you should reinstall the transmission support crossmember and bolts while torquing them to 70 nm (52 ft. lbs.). After lowering the transmission onto its support, you should mount the transmission mount at the transmission support nuts while applying 40 nm (30 ft. lbs.) torque. Replace the transmission jack while reinstalling the oil pan skid plate with its bolts to a torque of 20 nm (15 ft. lbs.). After that, lower the vehicle into position.

OEM Chevrolet Suburban 2500 Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Exhaust Pipes found

View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19418958
$1497.91 MSRP: $2236.50
You Save: $738.59 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 20854457, 25904626, 25904629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19418926
$2089.59 MSRP: $3134.37
You Save: $1044.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15896590, 20854453
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19418939
$2035.73 MSRP: $3152.45
You Save: $1116.72 (36%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15127418, 25904628, 25824120
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19418932
$2642.34 MSRP: $3954.87
You Save: $1312.53 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 25824121
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Muffler & Pipe
Part Number: 25940548
$638.25 MSRP: $958.53
You Save: $320.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe; Muffler, Exhaust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19418941
$2245.46 MSRP: $3358.95
You Save: $1113.49 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15905948, 20854454
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19420124
$970.06 MSRP: $1443.93
You Save: $473.87 (33%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Front Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15754088, 15755463, 10395213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19420109
$933.52 MSRP: $1389.07
You Save: $455.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Front Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 10395214, 15755464, 15754087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Muffler & Pipe
Part Number: 20882404
$892.40 MSRP: $1340.20
You Save: $447.80 (34%)
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe; Muffler, Exhaust
- Replaces: 20779912, 25940547
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter, Passenger Side
Part Number: 15064138
Product Specifications
- Other Name: Pipe Assembly-Exhaust Manifold *Marked Print; Exhaust Pipe; Front Pipe; Pipe, Catalytic Converter; Pipe, Exhaust Pipe
- Position: Passenger Side
- Replaces: 15045399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19419599
$1942.11 MSRP: $2903.47
You Save: $961.36 (34%)
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15896591
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Muffler
Part Number: 89060649
Product Specifications
- Other Name: Muffler Assembly, Exhaust (W/Exhaust & Tail Pipe & 3Way Catalytic Converter; Muffler, Exhaust
- Replaces: 15755165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Muffler
Part Number: 88983207
Product Specifications
- Other Name: Muffler Assembly, Exhaust (W/Exhaust & Tail Pipe & 3Way Catalytic Converter; Muffler, Exhaust
- Replaces: 88983203
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 19420119
$1865.17 MSRP: $2787.94
You Save: $922.77 (34%)
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 20854455, 15896592
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Front Pipe, Passenger Side
Part Number: 15013592
Product Specifications
- Other Name: Pipe, Catalytic Converter; Exhaust Pipe; Pipe, Exhaust Pipe
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Muffler & Pipe
Part Number: 22812179
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe; Muffler, Exhaust
- Replaces: 15896610
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Catalytic Converter
Part Number: 15070466
Product Specifications
- Other Name: Converter; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Muffler
Part Number: 15092796
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust & Tail Pipe & 3W; Muffler, Exhaust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Muffler & Pipe
Part Number: 20960897
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler
- Replaces: 25940542, 20779907
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Muffler & Pipe
Part Number: 19256935
Product Specifications
- Other Name: Muffler Assembly, Exhaust (W/Exhaust Pipe & Tail Pipe); Muffler; Muffler, Exhaust; Exhaust Pipe
- Replaces: 15875136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L GAS

| Page 1 of 2 |Next >

1-20 of 35 Results

Chevrolet Suburban 2500 Exhaust Pipe

Our website offers an extensive catalog of genuine Chevrolet Suburban 2500 Exhaust Pipe at unbeatable prices. Every OEM Chevrolet Suburban 2500 Exhaust Pipe comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Suburban 2500 Exhaust Pipe Parts Questions & Experts Answers

Catalytic Converter
19420109
Q: How to replace the exhaust pipe on 6.01 and 8.1 engines on Chevrolet Suburban 2500?
A: The replacement of exhaust manifold pipes on engines 6.01 and 8.1 begins with proper support of the vehicle during the work. After you remove the skid plate bolts of the oil pan and the plate itself, you should use a transmission jack to support the transmission. After removing the transmission mount to transmission support nuts, we should raise the transmission off its support component. Disassemble the bolts that hold the transmission support crossmember as well as the complete crossmember removal. First, remove any necessity of exhaust Muffler, then detach the engine harness clip with the Oxygen Sensor pigtail followed by disconnecting the connector position assurance (CPA) retainer and Oxygen Sensor electrical connector. The maintenance process requires Oxygen Sensor removal together with exhaust manifold pipe nuts and the pipe itself until the hanger slides from its bracket and disposal of the exhaust manifold pipe seal. Installation requires users to first position a fresh exhaust manifold pipe seal onto the exhaust manifold pipe followed by fitting the pipe while adding lubricant to the Exhaust Pipe hanger bracket for aid in installation. After placing the exhaust manifold pipe hanger within the bracket, you should install the exhaust manifold pipe nuts before torquing them to 50 nm (39 ft. lbs.). The replacement exhaust manifold pipe requires anti-seize compound GM P/N 12377953 or equivalent, which should be applied to threads of the old Oxygen Sensor before installing with a torque of 42 nm (31 ft. lbs.). The procedure for uninstalled pipes involves connecting the Oxygen Sensor electrical connector while also installing the CPA retainer and applying the clip over the engine harness and Oxygen Sensor pigtail. After installing the exhaust Muffler, you should reinstall the transmission support crossmember and bolts while torquing them to 70 nm (52 ft. lbs.). After lowering the transmission onto its support, you should mount the transmission mount at the transmission support nuts while applying 40 nm (30 ft. lbs.) torque. Replace the transmission jack while reinstalling the oil pan skid plate with its bolts to a torque of 20 nm (15 ft. lbs.). After that, lower the vehicle into position.

Related Chevrolet Suburban 2500 Parts

Browse Chevrolet Suburban 2500 Exhaust Pipe by Years

2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000