How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Tahoe?

The first stage of work involves removing the Rocker Arm before starting the Valve Stem Oil Seal and valve spring replacement. Turn the Spark Plug wire boot 1/2 turn and gently remove it at the base. Umbuckle the spark plugs 1 or 2 turns first making sure to brush away dust when the motor is at regular room temperature. Push the j 22794 adapter into the Spark Plug hole and join it to the Air Hose while the air pressure keeps the valves in position. Use the j 38606 (Valve Spring Compressor) to compress the valve spring. Then take out valve stem keys (225) before carefully loosening valve spring tension. Take off the j 38606 device before working on the valve spring cap (224), valve spring (223), Valve Stem Oil Seal (222), and valve (228). The valve spring seat area needs cleaning, while valve guide and Valve Stem Oil Seal require engine oil lubrication. Place valves (228) into ports first then coat Valve Stem Oil Seal (222), valve spring (223), and valve spring cap (224) one after another. Use the j 38606 to squeeze the valve spring then add valve keys while applying grease on them and verifying good contact in valve stem tracking. Slowly let go of the valve spring tension while keeping the valve keys locked in position before taking out the j 38606. Gently hit the valve stem tip with a hammer made of plastic material to ensure the keys reach their proper position. Thread the j 22794 back into the Spark Plug port then turn the hand starter to light the Spark Plug before torquing it to 15 nm (11 lb ft). Push each Spark Plug wire boot gently to see if it needs replacing after you attach one end to the Ignition Coil and the other end to the Spark Plug. Finally, install the Rocker Arm.

OEM Chevrolet Tahoe Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Valve Stem Oil Seals found

View related parts
Chevrolet Tahoe Valve Seals
Part Number: 12689007
$5.30 MSRP: $8.30
You Save: $3.00 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 12645473
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 Chevrolet Tahoe | Commercial, High Country, LS, LT, LTZ, PPV, Premier, RST, SSV, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 12689006
$4.60 MSRP: $7.58
You Save: $2.98 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 12645472
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 Chevrolet Tahoe | Commercial, High Country, LS, LT, LTZ, PPV, Premier, RST, SSV, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 12533586
$23.37 MSRP: $36.61
You Save: $13.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 12482063
$39.49 MSRP: $61.86
You Save: $22.37 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2014 Chevrolet Tahoe | Base, Hybrid, LS, LT, LTZ, PPV, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 12482062
$43.31 MSRP: $67.83
You Save: $24.52 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal; Valve Spring; Valve Springs
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2014 Chevrolet Tahoe | Base, Hybrid, LS, LT, LTZ, PPV, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 12457652
$20.81 MSRP: $32.59
You Save: $11.78 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Replaces: 12560189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 10212810
$4.98 MSRP: $7.81
You Save: $2.83 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Valve Seal Kit
- Replaces: 00460483, 460483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 55484799
$2.69 MSRP: $4.23
You Save: $1.54 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Tahoe | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 10214034
$1.70 MSRP: $2.67
You Save: $0.97 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Seal Ring; Valve Seal O-Rings
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Valve Seals
Part Number: 12564852
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 12558674
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS

Chevrolet Tahoe Valve Stem Oil Seal

Our website offers an extensive catalog of genuine Chevrolet Tahoe Valve Stem Oil Seal at unbeatable prices. Every OEM Chevrolet Tahoe Valve Stem Oil Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Tahoe Valve Stem Oil Seal Parts Questions & Experts Answers

Valve Seals
12482062
Q: How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Tahoe?
A: The first stage of work involves removing the Rocker Arm before starting the Valve Stem Oil Seal and valve spring replacement. Turn the Spark Plug wire boot 1/2 turn and gently remove it at the base. Umbuckle the spark plugs 1 or 2 turns first making sure to brush away dust when the motor is at regular room temperature. Push the j 22794 adapter into the Spark Plug hole and join it to the Air Hose while the air pressure keeps the valves in position. Use the j 38606 (Valve Spring Compressor) to compress the valve spring. Then take out valve stem keys (225) before carefully loosening valve spring tension. Take off the j 38606 device before working on the valve spring cap (224), valve spring (223), Valve Stem Oil Seal (222), and valve (228). The valve spring seat area needs cleaning, while valve guide and Valve Stem Oil Seal require engine oil lubrication. Place valves (228) into ports first then coat Valve Stem Oil Seal (222), valve spring (223), and valve spring cap (224) one after another. Use the j 38606 to squeeze the valve spring then add valve keys while applying grease on them and verifying good contact in valve stem tracking. Slowly let go of the valve spring tension while keeping the valve keys locked in position before taking out the j 38606. Gently hit the valve stem tip with a hammer made of plastic material to ensure the keys reach their proper position. Thread the j 22794 back into the Spark Plug port then turn the hand starter to light the Spark Plug before torquing it to 15 nm (11 lb ft). Push each Spark Plug wire boot gently to see if it needs replacing after you attach one end to the Ignition Coil and the other end to the Spark Plug. Finally, install the Rocker Arm.