How to replace the blower motor resistor on Chevrolet Tracker?

The first step for replacing the Blower Motor Resistor is to open the instrument panel and push on each side to drop it down. Take off the screw from the blower case, then disconnect the Blower Motor Resistor wire and take out the part. Simply place the newly bought Blower Motor Resistor in the blower case and make sure it is safe with a screw. Put the Blower Motor Resistor connector in place and close up the instrument panel.

OEM Chevrolet Tracker Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
Chevrolet Tracker Resistor
Part Number: 91176036
Product Specifications
- Other Name: Resistor, Blower Motor; Blower Motor Resistor; Resistor, A/C Evaporator Blower; Resistor, Heater Blower Motor
- Replaces: 91174905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Resistor
Part Number: 91172742
Product Specifications
- Other Name: Resistor, Blower Motor; Resistor, Heater Blower Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS

Chevrolet Tracker Blower Motor Resistor

Our website offers an extensive catalog of genuine Chevrolet Tracker Blower Motor Resistor at unbeatable prices. Every OEM Chevrolet Tracker Blower Motor Resistor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Tracker Blower Motor Resistor Parts Questions & Experts Answers

Resistor
91176036
Q: How to replace the blower motor resistor on Chevrolet Tracker?
A: The first step for replacing the Blower Motor Resistor is to open the instrument panel and push on each side to drop it down. Take off the screw from the blower case, then disconnect the Blower Motor Resistor wire and take out the part. Simply place the newly bought Blower Motor Resistor in the blower case and make sure it is safe with a screw. Put the Blower Motor Resistor connector in place and close up the instrument panel.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Blower Motor Resistor by Years

2004 2003 2002 2001 2000 1999 1998