OEM Chevrolet Tracker Mirror Switch

Power Mirror Control Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mirror Switches found

  • Chevy Tracker Mirror Switch - 30020878
    Chevy Tracker Mirror Switch Diagram - 30020878
    View related parts
    Product Specifications
    • Other Name: Switch, Rear View Mirror; Power Mirror Switch; Switch, Rear View Mirror - Inside & Outside
    • Position: Rear
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
  • Chevy Tracker Mirror Switch - 30017292
    Chevy Tracker Mirror Switch Diagram - 30017292
    View related parts
    Product Specifications
    • Other Name: Switch, Rear View Mirror; Power Mirror Switch; Switch, Rear View Mirror - Inside & Outside
    • Position: Rear
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS

Chevrolet Tracker Mirror Switch

Our website offers an extensive catalog of genuine Chevrolet Tracker Mirror Switch at unbeatable prices. Every OEM Chevrolet Tracker Mirror Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Tracker Mirror Switch Parts Questions & Experts Answers

  • Q: How to service the power mirror switch on Chevrolet Tracker?
    A: You should begin by removing the 3 screws and taking off the IP steering column opening trim plate from the instrument panel. After that, squeeze and pull the upper and lower retaining tabs at the back of the instrument panel to release the outside remote control rearview mirror switch . Take the rearview mirror switch out of the instrument panel so you can remove the electrical connector, then pull the switch out of the vehicle. Connect the electrical connector to the outside remote control rearview mirror switch before putting the switch back into the instrument panel and making sure the retaining tabs snap in place. Now, put the IP steering column opening trim plate back in place and fix it using the 3 screws .

Related Chevrolet Tracker Parts