OEM Chevrolet Tracker Back Up Light Switch

Chevrolet Tracker Back Up Light Switch Parts Questions & Experts Answers

• Neutral Safety Switch
  91172413
  Q: How to service and repair the Back Up Light Switch and replace the tail lamp assembly along with the bulbs on Chevrolet Tracker?

  A: A technician should first remove the two screws securing the tail lamp before accessing the bulb sockets of back up lamp switch and tail lamp assembly with their attached sidemarker stop and turn signal bulbs. Pulling the tail lamp toward you reveals access to the sockets that control turn signal and back up and tail/stop lamp functions. Twist the turn signal bulb socket counterclockwise from the tail lamp assembly before removing the turn signal bulb when needed. To remove the back up lamp bulb socket twist it counterclockwise before taking out both the lamp and its bulb. To remove the tail/stop lamp bulb socket twist it counterclockwise and then remove the bulb as needed. Remove the tail lamp from the vehicle by disconnecting its electrical connector. Begin by installing the bulb into the tail/stop lamp socket before tightening it clockwise into the tail lamp assembly. The installation process should be repeated twice. First for the back up lamp bulb and socket and secondly for the turn signal lamp bulb and socket. Attach the tail lamp electrical connector and fasten the tail lamp to its mounting position through two screws.