How to replace the TPMS Sensor on Chevrolet Trailblazer?

In order to replace Tire Pressure Sensor, first lift the vehicle on a convenient support and remove the tire/wheel assembly. Then, remove the tire from the wheel, making sure to set the cap and valve of the sensor on a clean and dry space so that it does not get damaged; the cap is of aluminum and the valve is made up of nicked-plated, and should not be replaced with other specifications. When prying the tire bead off the wheel, position the bead breaking fixture at a 90-degree angle to the valve stem and mount the mounting/dismounting head at a position near the tire iron or pry bar to be used, in a clock position to the sensor body. Using the tire machine, rotate the tire/wheel assembly clockwise until you move the tire bead to the outside of the wheel rim, and repeat for the inner bead. Unscrew the tire pressure sensor nut and keep the tire and wheel surfaces clear of any remaining tire sealant when removing the tire pressure sensor. For installation, clean the sealing area around the grommet, insert the sensor into the hole of the wheel with its air passage facing away from the wheel, and fitting in the sensor nut while facing its body parallel to the inside wheel surface and tighten it to 7Nm (62 inch lbs.). Before reinstalling the tire place mounting/dismounting head 180 degrees away from valve stem and bead transition 45 degrees to the left of valve stem, twist tire/wheel assembly clockwise to move tire bead to the insides of the rim of the wheel and do so again for outer bead. After reinstalling the tire/wheel assembly on the vehicle, observe that a service replacement tire pressure sensor was shipped in OFF mode and must be spun above 32 km/h (20 mph) for 10 sec at least before the sensor will close the internal roll switch and then lower the vehicle and learn tires pressure sensor.

OEM Chevrolet Trailblazer TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 TPMS Sensors found

View related parts
Chevrolet Trailblazer TPMS Sensor Part Number: 25774007
$57.98 MSRP: $113.50
You Save: $55.52 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Tire Pressure Indicator; TPMS Sensor Valve Assembly; Valve Repair Set; Tyre Pressure Repair Kit.; Tire Pressure Sensor; Transmitter; Sensor, Tire Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer TPMS Sensor Part Number: 25774006
$85.65 MSRP: $156.38
You Save: $70.73 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Tire Pressure; Tire Pressure Sensor; Pressure Sensor; Transmitter
- Replaces: 25763677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Wheel Nut Part Number: 15234846
$7.26 MSRP: $13.64
You Save: $6.38 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut, Tire Pressure; TPMS Sensor Service Kit; Valve Stem Nut; TPMS Sensor Valve; TPMS Sensor Nut; Pressure Sensor Nut; Tire Sensor Nut; Transmitter Nut; Nut, Wheel
- Replaces: 10268439, 15825474, 15125473, 25708165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer TPMS Sensor Part Number: 13540603
$42.68 MSRP: $76.22
You Save: $33.54 (44%)
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13516165, 13522631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS

Chevrolet Trailblazer TPMS Sensor

Want to cut long-term maintenance and repair costs? Choose OEM TPMS Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Trailblazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Trailblazer TPMS Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

This Chevrolet Trailblazer TPMS Sensor is among the most important parts that enhance the efficiency and durability of this Chevrolet Trailblazer series models. Intended for use in tracking tire pressure, this TPMS Sensor reminds drivers of an unsafe pressure reading, thus increasing safety and productivity on the highway. Every Chevrolet Trailblazer comes with a TPMS Sensor for every tire to have the full coverage. It comes in the clamp-in, screw-in, and snap-in options to accommodate people's desires and requirements. There are two types of TPMS implemented in the Chevrolet Trailblazer: indirect TPMS or iTPMS and direct TPMS or dTPMS to enable the consumer to select between usages of software to monitor or use actual hardware equipment for real-time reading of tire pressure. As for the maintenance and replacement schedule of the TPMS Sensor it's advisable to have it checked annually and be replaced after five years. From its mid-size SUV and subcompact crossover that it has grown to be, Chevrolet Trailblazer has come through a number of changes showing off differently the advanced technological and efficiency features in the latest models. This evolution is supported by the TPMS Sensor, which, in the process of helping drivers to know their tire status optimizes the driving experience. Technologically advanced, the Chevrolet Trailblazer TPMS Sensor is famous for its reliability and hence make a great part for any trailblazer car owner, who is serious about safety and performance of the car.

Chevrolet Trailblazer TPMS Sensor Parts Questions & Experts Answers

TPMS Sensor
25774007
Q: How to replace the TPMS Sensor on Chevrolet Trailblazer?
A:
In order to replace Tire Pressure Sensor, first lift the vehicle on a convenient support and remove the tire/wheel assembly. Then, remove the tire from the wheel, making sure to set the cap and valve of the sensor on a clean and dry space so that it does not get damaged; the cap is of aluminum and the valve is made up of nicked-plated, and should not be replaced with other specifications. When prying the tire bead off the wheel, position the bead breaking fixture at a 90-degree angle to the valve stem and mount the mounting/dismounting head at a position near the tire iron or pry bar to be used, in a clock position to the sensor body. Using the tire machine, rotate the tire/wheel assembly clockwise until you move the tire bead to the outside of the wheel rim, and repeat for the inner bead. Unscrew the tire pressure sensor nut and keep the tire and wheel surfaces clear of any remaining tire sealant when removing the tire pressure sensor. For installation, clean the sealing area around the grommet, insert the sensor into the hole of the wheel with its air passage facing away from the wheel, and fitting in the sensor nut while facing its body parallel to the inside wheel surface and tighten it to 7Nm (62 inch lbs.). Before reinstalling the tire place mounting/dismounting head 180 degrees away from valve stem and bead transition 45 degrees to the left of valve stem, twist tire/wheel assembly clockwise to move tire bead to the insides of the rim of the wheel and do so again for outer bead. After reinstalling the tire/wheel assembly on the vehicle, observe that a service replacement tire pressure sensor was shipped in OFF mode and must be spun above 32 km/h (20 mph) for 10 sec at least before the sensor will close the internal roll switch and then lower the vehicle and learn tires pressure sensor.