How should a new body control module (BCM) be programmed to ensure it controls all features correctly on Chevrolet Uplander?

An organization must program a new Body Control Module with its necessary feature settings to work properly. The tech 2 system displays the suitable rpo choices for every vehicle. Start programming only after you verify that the battery is fully charged and you enable the on position on the Ignition Switch while making sure the dlc is accessible plus all disconnected components are back in place. Make sure the scan tool shows the accurate vin to prevent the service part from locking programming permanently. Open computer integrating systems on your scanner and click the module setup menu to reach Body Control Module. Use the scan tool to run bcm setup, bpp calibration, and program key fobs processes. Check all bcm connections and update the scan tool software if it does not accept the program. To set up remote start on an sps terminal you must work with a tool that follows pass thru programming and then choose preferred screen settings in the remote start menu. A brake pedal position sensor calibration will need to be completed following bcm or ebcm replacement when you use a scanner to access the module setup menu and pick Body Control Module according to the on-screen directions. When replacing the bcm or pcm with the passkey sensor you must do the passkey 3 and vtd programming process. To complete this process you must first turn off the ignition for 10 seconds then plug in the scan tool and turn the ignition back on making sure the engine stays off. Finally check all the modules for dtc history and delete all saved issues.

OEM Chevrolet Uplander Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Body Control Modules found

View related parts
Chevrolet Uplander Ignition Immobilizer Module, Front Rear Part Number: 15219136
$57.61 MSRP: $158.38
You Save: $100.77 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Theft Deterrent Or Front/Rear/Side Object; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Position: Front Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Lock Module, Front Passenger Side Part Number: 15924354
$370.63 MSRP: $554.11
You Save: $183.48 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Front Side Door Locking System (W/Window Regulator); Module; Module, Door And End Gate Window; Module, Door Inner Control
- Position: Front Passenger Side
- Replaces: 15871679
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Module Part Number: 15238502
Product Specifications
- Other Name: Module, Theft Deterrent Or Front/Rear/Side Object; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Position: Rear
- Replaces: 15120122
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Body Control Module Part Number: 19119308
$182.80 MSRP: $326.00
You Save: $143.20 (44%)
Product Specifications
- Other Name: Module Assembly, Body Control (Remanufacture); Module; Module, Body Multi Function Electric Computer; Module, Door Lock Remote Control Inside
- Replaces: 15241862, 15872713, 15912525, 15219903, 15845202
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Lock Module, Front Driver Side Part Number: 15924355
Product Specifications
- Other Name: Module Assembly-Front Side Door Locking System (W/Window Regulator); Module; Module, Door And End Gate Window; Module, Door Inner Control
- Position: Front Driver Side
- Replaces: 15871680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Chevrolet Uplander Body Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Body Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Uplander parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Uplander Body Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Uplander Body Control Module (BCM) is one of the vital parts in the exhibits of Chevrolet Uplander series automobile that was manufactured from 2005 to 2009. This new era, advanced body control module is the firm's command centre for the management of electrical systems in a vehicle including the power windows, mirrors, air conditioning and central locking systems. The Chevrolet Uplander Body Control Module is the backbone of the car's electrical system since it interconnects all the car's different computers through the vehicle bus, thus improving their functionality and safety. The ability to interconnect with other models of Uplander also defines this model's applicability and makes it an important factor in driving. Certain load drivers such as the ability to lock doors and setting up lighting through the BCM definitely brings convenience to the Chevrolet Uplander and at the same time enhances the safety. Specifically, it is the solid structure of the BCM and the implementation of several electronic functions in car operations to enhance the interface of the automobile for the client. The Chevrolet Uplander Body Control Module is critical to buyers and especially the minivan's clients since it defines the car's reliability in terms of performance and modern technology, making it a core feature of the Chevrolet Uplander.

Chevrolet Uplander Body Control Module Parts Questions & Experts Answers

Ignition Immobilizer Module, Front Rear
15219136
Q: How should a new body control module (BCM) be programmed to ensure it controls all features correctly on Chevrolet Uplander?
A:
An organization must program a new Body Control Module with its necessary feature settings to work properly. The tech 2 system displays the suitable rpo choices for every vehicle. Start programming only after you verify that the battery is fully charged and you enable the on position on the Ignition Switch while making sure the dlc is accessible plus all disconnected components are back in place. Make sure the scan tool shows the accurate vin to prevent the service part from locking programming permanently. Open computer integrating systems on your scanner and click the module setup menu to reach Body Control Module. Use the scan tool to run bcm setup, bpp calibration, and program key fobs processes. Check all bcm connections and update the scan tool software if it does not accept the program. To set up remote start on an sps terminal you must work with a tool that follows pass thru programming and then choose preferred screen settings in the remote start menu. A brake pedal position sensor calibration will need to be completed following bcm or ebcm replacement when you use a scanner to access the module setup menu and pick Body Control Module according to the on-screen directions. When replacing the bcm or pcm with the passkey sensor you must do the passkey 3 and vtd programming process. To complete this process you must first turn off the ignition for 10 seconds then plug in the scan tool and turn the ignition back on making sure the engine stays off. Finally check all the modules for dtc history and delete all saved issues.